We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Kingston Technology Corp.

Kingston Technology Corp. KTH-PL424/8G 8GB DDR4 2400 ECC Registered memory upgrade

SKU CH-5WJZ-0PS1W MPN KTH-PL424/8G

An 8 GB DDR4 2400 ECC registered DIMM built for select HP/Compaq systems

  • Capacity8GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2400 (PC4 19200)
  • ECCYes
  • Buffered/RegisteredRegistered
  • Heat SpreaderNo
  • ECC protection prevents data corruption in critical workloads
  • Registered signal processing improves stability on select HP/Compaq systems
  • DDR4 2400 speed delivers 19200 MB/s bandwidth for responsive performance
  • 288-pin DIMM form factor fits designated HP/Compaq platforms
  • JEDEC-tested design ensures reliable compatibility with supported systems

HP/Compaq System Memory

This 8 GB DDR4 module is built for select HP and Compaq systems that require registered ECC memory. It installs as a single 288-pin DIMM and runs at the JEDEC-standard 2400 MT/s data rate. The registered buffer and error-correcting code protect data integrity in supported workstations and servers. Buyers with consumer desktops or laptops that accept only unbuffered non-ECC modules cannot use this product.

Registered ECC 288-Pin Design

The registered signal processing reduces electrical load on the memory controller, allowing stable operation in multi-DIMM configurations where the platform supports it. ECC circuitry detects and corrects single-bit errors without halting the system. The module has no heat spreader, so it fits in standard DIMM slots with normal clearance. Systems that do not enable registered or ECC modes in firmware will not boot with this DIMM installed.

Kingston Validation and Support

Each module is designed and tested to meet JEDEC specifications for DDR4-2400 (PC4-19200) operation. Kingston provides free technical support to assist with installation or compatibility questions. No additional software, cables or mounting hardware are included in the package. Users who need matching modules for multi-channel population must order identical part numbers separately.

Highlights

  • ECC protection prevents data corruption in critical workloads
  • Registered signal processing improves stability on select HP/Compaq systems
  • DDR4 2400 speed delivers 19200 MB/s bandwidth for responsive performance
  • 288-pin DIMM form factor fits designated HP/Compaq platforms
  • JEDEC-tested design ensures reliable compatibility with supported systems

Specifications

BrandKingston
ModelKTH-PL424/8G
Capacity8GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2400 (PC4 19200)
ECCYes
Buffered/RegisteredRegistered
Heat SpreaderNo
Compatible SystemHP/Compaq
FeaturesECC
Registered
for select HP/Compaq systems
Designed and Tested to meet JEDEC
Free Technical Support
Shipping weight0.05 kg
Package size175 × 64 × 20 mm

Questions about this item

Does the DDR4-2400 PC4-19200 standard cap the transfer rate at 2400 MT/s?

Yes, the module runs at 2400 MT/s with a peak bandwidth of PC4-19200, matching the JEDEC DDR4-2400 specification.

Will the 288-pin registered DIMM fit my HP/Compaq system?

The 288-pin DDR4 registered DIMM is built for select HP/Compaq platforms; verify your model's qualified vendor list before installing.

How do I install this ECC registered module and what step is often missed?

Power off, open the chassis, align the notch with the slot key, press firmly until the latches click, then enable ECC in BIOS if required.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.