KINGSTON BRASS
KINGSTON BRASS Heritage D-Type Rod Polished Brass Bath Faucet
Two-handle widespread lavatory faucet with 360-degree swivel spout, ceramic disc valves and 2.2 GPM flow rate in polished brass
- TypeBath Accessories
- Widespread fit for 8" to 14" sinks
- 360° swivel spout directs water where needed
- Ceramic disc valves prevent drips and leaks
- Solid brass construction resists corrosion and tarnish
- 2 GPM flow rate meets efficiency codes
Heritage Bath Faucet
This Kingston Brass Heritage D-Type rod faucet is a two-handle widespread lavatory fixture finished in polished brass. It mounts on a three-hole sink with 8 to 14 inch adjustable centers and includes a solid brass pop-up drain. The solid brass body and ceramic disc valves are built for long-term durability.
Classic Style for Three-Hole Sinks
Suits homeowners fitting a traditional bathroom who need a deck-mount faucet with a 360 degree swivel spout and a 2.2 GPM flow rate. Not for single-hole or four-hole installations, and not for buyers who require a pull-down sprayer or a modern minimalist finish.
Check Mounting and Pressure
Verify the sink has three holes spaced between 8 and 14 inches on center and that the deck is thick enough for the supplied hardware. Confirm the supply lines accept 1/2 inch IPS connections and that household pressure reaches 60 PSI for rated flow.
Highlights
- Widespread fit for 8" to 14" sinks
- 360° swivel spout directs water where needed
- Ceramic disc valves prevent drips and leaks
- Solid brass construction resists corrosion and tarnish
- 2 GPM flow rate meets efficiency codes
Specifications
| Brand | Kingston Brass |
|---|---|
| Type | Bath Accessories |
Questions about this item
Does this faucet need a three-hole sink or can it work with a single-hole basin?
It is designed for a three-hole sink with 8 to 14 inch widespread centres; a single-hole basin will not accept the separate hot and cold handles and spout.
Will the 1/2 inch IPS inlets thread directly onto my existing copper supply lines or do I need adapters?
The inlets are 1/2 inch IPS female threads; if your supplies end in 1/2 inch male IPS they connect directly, otherwise use the appropriate brass adapter.
How can I confirm the 2.2 GPM flow rate is being delivered after installation?
Open both handles fully with supply pressure at 60 PSI, catch the stream in a calibrated container for 60 seconds and verify the volume is about 8.3 litres.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



