We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper-free aluminium straight-blade plug, epoxy powder coated, 125V 20A 60Hz

Killark

Killark UGR5-20231QWWW straight blade plug 125V 20A 60Hz 1HP

SKU CH-PFNY-D84F8

A 20 A, 125 V straight-blade plug rated for 1 hp at 60 Hz with a 3/4 in feed-thru hub and epoxy-coated copper-free aluminium construction

  • Copper-free aluminium construction resists corrosion in harsh environments
  • 125 V AC rating matches standard industrial power circuits
  • 20 A current capacity supports heavy-duty equipment loads
  • 60 Hz frequency compatible with North American grid supply
  • NEMA 5-20R configuration ensures correct mating with locking connectors

Straight blade plug 125V 20A 60Hz

This straight blade plug is a NEMA 5-20R receptacle rated for 125 V AC at 60 Hz and 20 A with a 1 hp motor rating. It is built from copper-free aluminium with an epoxy powder coated finish and carries NEMA 3, 7, 9 ratings for harsh environments. The feed-through hub accepts 3/4 in conduit and mounts in a single-gang box.

Copper-free aluminium construction

The copper-free aluminium body replaces standard brass or steel fittings that can corrode or spark in classified locations. The epoxy powder coating adds chemical resistance, making the upgrade worthwhile when the installation must meet NEMA 3, 7, 9 requirements in wet or hazardous areas.

Sustained load behaviour

Under continuous 20 A loads the aluminium housing dissipates heat without the galvanic corrosion risk of dissimilar metals. The feed-through hub maintains a sealed conduit path during extended operation, preserving the NEMA 3, 7, 9 enclosure integrity over long duty cycles.

Highlights

  • Copper-free aluminium construction resists corrosion in harsh environments
  • 125 V AC rating matches standard industrial power circuits
  • 20 A current capacity supports heavy-duty equipment loads
  • 60 Hz frequency compatible with North American grid supply
  • NEMA 5-20R configuration ensures correct mating with locking connectors

Specifications

BrandKILLARK

Questions about this item

What hub size and style does the UGR5-20231QWWW require for mounting?

It uses a 3/4 in feed-thru hub, so the mounting box must accept that hub size and style.

How is the UGR5-20231QWWW wired, and what step is often missed?

Connect the three wires to the 2-pole 5-20R terminals inside a 1-gang box; the step often missed is securing the feed-thru hub before tightening the cover.

When should the copper-free aluminum body or epoxy powder coat be inspected or replaced?

Inspect the housing and coating after any impact or corrosion exposure; replace the receptacle if the finish is breached or the aluminum shows pitting.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.