We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Long braided HDMI cable with gold connectors, 60 feet

Keyence

Keyence HDMI Cable 60ft 4K 30Hz CL3 Braided audio video converter

SKU CH-9ZAJ-2KFAD

A 60 ft braided HDMI cable with CL3 in-wall rating delivers 4K at 30 Hz with ARC and gold-plated connectors

  • Changer TypeHDMI Cables
  • 60 ft reach links devices across rooms without signal drops
  • CL3 fire-resistant jacket certified for safe in-wall and ceiling routing
  • 28 AWG copper conductors with 24 K gold-plated connectors resist interference over long lengths
  • 4K UHD at 3840 x 2160 30 Hz with HDR10 ARC 3D and HDCP 2.2 support
  • Backwards compatible with HDMI 1.4 1.3 1.2 for wide device support

60 ft CL3-Rated HDMI Cable

This 60-foot HDMI cable carries 4K UHD video at 3840x2160 resolution and 30 Hz refresh rate across long distances. It meets CL3 fire-safety standards for in-wall and ceiling routing in homes, offices or commercial installs. The braided jacket and 28 AWG copper conductors protect signal integrity over the full length. It suits projector, home-theatre or surveillance setups needing a single hidden run.

Braided Jacket and Gold-Plated Connectors

A nylon-braided outer sleeve resists abrasion during pulls through studs or conduit. Corrosion-resistant 24 K gold-plated pins and a chrome-plated aluminium shell maintain a tight, low-resistance connection after repeated mating cycles. The construction supports ARC so audio can return from a TV to a receiver without a separate cable. Backwards compatibility with HDMI 1.2, 1.3 and 1.4 preserves use with older sources.

Check Source Resolution and Refresh Needs

Verify the source device can output 4K at 30 Hz; the cable is not rated for 8K or high-refresh-rate PC gaming. Confirm the display and any intermediate switch or AVR support HDCP 2.2 for protected 4K content. Ensure the 60-foot reach matches the planned route; longer runs would require an active extender. Buyers needing 4K at 60 Hz or 8K transmission should consider an active fibre alternative.

Highlights

  • 60 ft reach links devices across rooms without signal drops
  • CL3 fire-resistant jacket certified for safe in-wall and ceiling routing
  • 28 AWG copper conductors with 24 K gold-plated connectors resist interference over long lengths
  • 4K UHD at 3840 x 2160 30 Hz with HDR10 ARC 3D and HDCP 2.2 support
  • Backwards compatible with HDMI 1.4 1.3 1.2 for wide device support

Specifications

Changer TypeHDMI Cables

Questions about this item

Will the 28AWG copper conductors need replacement after long-term in-wall installation?

The 28AWG copper conductors are engineered to resist interference over the 60 ft length and the CL3-rated PVC jacket is fire-resistant for permanent in-wall routing, so no scheduled replacement is required.

What resolution limit appears first when running 4K content continuously at this length?

The cable is specified for 3840x2160 at 30 Hz; 4K at higher refresh rates or 8K signals are not supported at this 60 ft distance.

How much heat or noise does the cable produce during all-day operation?

As a passive copper cable it generates no audible noise and negligible heat; the 24K gold-plated connectors and braided jacket remain at ambient temperature during continuous use.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.