We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Keyence FD-Q32C clamp-on flow sensor main unit, compact rectangular grey housing with M12 connector

Keyence

Keyence FD-Q32C Clamp-on Flow Sensor 25A/32A

SKU CH-9JKZ-FYV48 MPN FD-Q32C

Clamp-on flow sensor for 25A/32A pipes measuring up to 300 L/min with IP65/IP67 enclosure and M12 connector

  • TypeSensors
  • Clamp-on design enables installation without pipe cutting
  • Display resolution of 0.1 L/min provides precise flow readings
  • Response time selectable from 0.5 s to 60 s suits varied applications
  • Repeatability reaches ±0.5 % at 5 s setting for consistent measurement
  • IP65/IP67 enclosure rating protects against dust and water ingress

Clamp-on flow sensor for 25A/32A pipes

The Keyence FD-Q32C is a clamp-on flow sensor that measures liquid flow without cutting into pipework. It mounts on the outside of 25A or 32A piping and provides a display resolution of 0.1 or 1 L/min. The sensor main unit uses PPS, PES, PBT and stainless-steel alloys for chemical compatibility and carries an IP65/IP67 enclosure rating.

Suited for non-invasive monitoring on compatible

This unit suits plants that need flow data on 25A or 32A lines without process shutdown or pipe modification. It is not for buyers who require an inline sensor, who need measurement on pipe diameters outside the 25A/32A range, or who need a sensor without an M12 4-pin power and I/O connector.

Selectable response time sets repeatability

The response time can be set to 0.5 s, 1.0 s, 2.5 s, 5 s, 10 s, 30 s or 60 s, and repeatability tightens from ±2.0% at 0.5 s to ±0.5% at 10 s. Choosing the response time that matches the process dynamics is the single specification that decides whether this sensor meets the application.

Highlights

  • Clamp-on design enables installation without pipe cutting
  • Display resolution of 0.1 L/min provides precise flow readings
  • Response time selectable from 0.5 s to 60 s suits varied applications
  • Repeatability reaches ±0.5 % at 5 s setting for consistent measurement
  • IP65/IP67 enclosure rating protects against dust and water ingress

Specifications

TypeSensors

Questions about this item

What pipe sizes does the FD-Q32C clamp onto?

The FD-Q32C clamp-on flow sensor fits 25A and 32A pipe sizes.

How do I connect the FD-Q32C and which response time should I choose?

Connect the sensor using the M12 4-pin power I/O connector; select a response time from 0.5 s, 1.0 s, 2.5 s, 5 s, 10 s, 30 s or 60 s depending on the required repeatability.

When should I verify the zero-cut flow rate on the FD-Q32C?

Check the zero-cut flow rate (default 5.0 L/min) during periodic maintenance to ensure the sensor still reads zero correctly at low flow.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.