We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue braided HDMI cable, two feet long, straight connectors

Keyence

Keyence Audio Video Converter HDMI Cable 2 ft Blue

SKU CH-BC7G-M41SG

A 2 ft braided HDMI 2.0 cable carrying 4K at 60 Hz and 18 Gbps for on-camera monitors and capture cards

  • Changer TypeHDMI Cables
  • Supports true 4K at 60 Hz with 18 Gbps bandwidth
  • HDMI 2.0 performance enables 4096 x 2160 resolution for external recording
  • Braided jacket and reinforced connectors resist kinks and port stress on rigs
  • 2 ft length allows clean cable routing on camera cages and monitor stands
  • Tested compatibility with Atomos, Blackmagic, SmallHD and major cinema cameras

4K 60 Hz HDMI cable for on-camera monitors

This two-foot braided HDMI cable carries 4K 60 Hz HDR and 3D video at up to 18 Gbps. It is built for on-camera monitors, capture cards and external recorders that need a reliable short run. The straight connectors suit tight rigs and clean cable routing.

Check port type and resolution needs

Verify that both devices use full-size HDMI Type A ports before ordering. Confirm the source can output 4096 x 2160 at 60 Hz if you require that resolution. The cable supports HDMI 2.0 bandwidth, so older 1.4 ports will work but at lower capabilities.

Braided jacket with reinforced connectors

A nylon braided jacket resists kinks and protects the conductors during frequent rig changes. Reinforced connector strain relief reduces port stress when the cable is plugged and unplugged on set. The design has been tested for fit with common camera cages and monitor stands.

Highlights

  • Supports true 4K at 60 Hz with 18 Gbps bandwidth
  • HDMI 2.0 performance enables 4096 x 2160 resolution for external recording
  • Braided jacket and reinforced connectors resist kinks and port stress on rigs
  • 2 ft length allows clean cable routing on camera cages and monitor stands
  • Tested compatibility with Atomos, Blackmagic, SmallHD and major cinema cameras

Specifications

Changer TypeHDMI Cables

Questions about this item

Does the 2 ft cable ship with any adapters or do I need to buy a separate HDMI-to-mini-HDMI converter for my camera?

The box contains only the 2 ft HDMI Type A to HDMI Type A braided cable; no adapters or converters are included, so a separate HDMI-to-mini-HDMI adapter is required if your camera uses a smaller port.

Should I choose this 2 ft version or a longer length for an Atomos Ninja V mounted on a rig?

The 2 ft length is designed for clean, short runs between an on-camera monitor such as the Atomos Ninja V and the camera body; select a longer cable only if the monitor sits farther away on the rig.

What does the 18 Gbps rating mean when I plug this into a Blackmagic Video Assist recording 4K 60 Hz HDR?

The 18 Gbps bandwidth carries the full 4096 × 2160 at 60 Hz signal with HDR and 3D metadata, preventing dropouts or handshake errors during external recording on the Blackmagic Video Assist.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.