We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

KETAWA SATA 6.0 Gbps cable kit (4 pack)

SKU CH-W6EX-DZ8DB

Four-piece kit with two 6 Gbps data cables — one straight, one 90-degree — plus two power splitters to add SATA drives from Molex or existing SATA power

  • TypeSATA
  • ColorBlack
  • Connector DetailSata
  • Terminal GenderMale-to-Female
  • Speed6 gigabits_per_second
  • ConductorCopper
  • 6 Gbps SATA III speed for fast data transfer
  • Locking latches on both ends ensure secure connections
  • Kit includes straight and right-angle cables for flexible routing
  • Two power splitters add four SATA power ports from one Molex
  • Supports 5 V SATA drives and 12 V ATX supplies

What this kit includes

The KETAWA 623064642506 pack supplies four cables for SATA storage expansion. It contains two data cables — one straight and one 90-degree right-angle — plus two power splitter cables: a 4-pin Molex to dual 15-pin SATA adapter and a 15-pin SATA to dual 15-pin SATA extender. All connectors are male-to-female with locking latches. Suitable for builders adding HDDs, SSDs or optical drives to a system with limited native SATA ports.

Sustained data behaviour

Each data cable is rated for SATA 3.0 at 6.0 Gbps and uses copper conductors. The locking latch on every connector resists vibration-induced disconnects during long copy jobs or continuous drive operation. The right-angle plug reduces bend stress on the drive port in cramped drive cages, helping maintain signal integrity over time. No active electronics are present, so performance depends entirely on the host controller and drive capabilities.

Installation notes

The 7.9in Molex-to-SATA power cable draws 5 V and 12 V from a legacy LP4 connector; it does not supply 3.3 V, so drives requiring that rail will not spin up. The SATA-to-SATA power splitter simply duplicates the existing 15-pin supply — total current stays limited by the single source connector. Right-angle data cable orientation is fixed; verify clearance against adjacent components before routing. Locking tabs require a deliberate squeeze to release — pull the plug body, not the cable.

Highlights

  • 6 Gbps SATA III speed for fast data transfer
  • Locking latches on both ends ensure secure connections
  • Kit includes straight and right-angle cables for flexible routing
  • Two power splitters add four SATA power ports from one Molex
  • Supports 5 V SATA drives and 12 V ATX supplies

Specifications

BrandKETAWA
Model623064642506
TypeSATA
ColorBlack
Connector DetailSata
Terminal GenderMale-to-Female
Speed6 gigabits_per_second
ConductorCopper
FeaturesData Transfer

Questions about this item

Will the 6.0 Gbps SATA data cables generate noticeable heat or noise when running continuously?

The copper-conductor SATA III cables carry only data signals, so they produce no audible noise and negligible heat even during all-day transfers at 6.0 Gbps.

What power connectors must my PSU already have to use the included splitters?

You need at least one 4-pin Molex (LP4) connector for the 4-pin-to-2×15-pin splitter and one spare 15-pin SATA power lead for the 15-pin-to-2×15-pin splitter.

Can the right-angle data cable and power splitters work with older SATA I or II drives I want to keep?

Yes — the SATA III data cables are backward-compatible with SATA I and II drives, and both power splitters deliver standard 5 V and 12 V rails that legacy drives require.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.