We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Kenuco

Kenuco 9V AC Adapter 1A 8 Tips 5.9 ft

SKU CH-GMJS-KV671

Delivers 9V DC at up to 1A with eight interchangeable tips and 5.9 ft cable for Arduino and 9V electronics

  • TypeAC Adapter
  • Powers 9V devices from 100–240V mains supply
  • 1A output supports loads from 100mA to 1000mA
  • Eight interchangeable tips fit barrel sizes 4.0×1.7 mm to 6.0×4.4 mm
  • 9 ft cable gives flexible placement
  • Built-in short-circuit, over-current, over-voltage and over-temperature protection

Universal 9V AC Adapter with Eight Tips

This 9V AC adapter delivers up to 1A centre-positive output and accepts 100-240V AC input at 50-60Hz. It targets owners of Arduino UNO R3, Mega 2560, 1280, CCTV units, Elegoo and IEIK boards that require a 9V supply between 100mA and 1000mA. The 5.9 ft cable and eight interchangeable plugs cover barrel sizes 4.0×1.7 mm, 4.8×1.7 mm, 5.5×1.7 mm, 6.0×3.0 mm, 6.0×4.4 mm, 3.5×1.35 mm, 2.5×0.7 mm and an LED terminal connector.

Protection Features and Thermal Behaviour

Built-in short-circuit, over-current, over-voltage and over-temperature protection shut the unit down before components overheat. In normal use the adapter runs silently with no fan and draws only the power needed by the connected load up to the 1A limit. The wide 100-240V input range lets it operate on mains worldwide without a separate voltage selector.

Eight Tips Expand Device Compatibility

The bundled tip set adds 4.0×1.7 mm, 4.8×1.7 mm, 5.5×1.7 mm, 6.0×3.0 mm, 6.0×4.4 mm, 3.5×1.35 mm, 2.5×0.7 mm and an LED terminal connector so one brick can power many 9V centre-positive devices. It does not fit pedals, piano keyboards or any gear that uses a negative-tip barrel jack.

Highlights

  • Powers 9V devices from 100–240V mains supply
  • 1A output supports loads from 100mA to 1000mA
  • Eight interchangeable tips fit barrel sizes 4.0×1.7 mm to 6.0×4.4 mm
  • 9 ft cable gives flexible placement
  • Built-in short-circuit, over-current, over-voltage and over-temperature protection

Specifications

TypeAC Adapter

Questions about this item

How do I install the adapter and which polarity setting is the step people get wrong?

Plug the AC adapter into a 100-240V 50-60Hz outlet, select the tip that matches your device's jack, and ensure the centre pin is positive; the adapter only supports positive-centre polarity so devices requiring negative-tip will not work.

What maintenance or replacement will the adapter need later?

The cable and interchangeable tips are the wear items; inspect the 5.9 ft cord and the eight tip sizes — 4.0*1.7 mm, 4.8*1.7 mm, 5.5*1.7 mm, 6.0*3.0 mm, 6.0*4.4 mm, 3.5*1.35 mm, 2.5*0.7 mm and the LED terminal connector — for fraying or loose fit and replace if damaged.

What limit appears first under sustained use at full load?

The 1A (1000mA) output current limit is reached first; built-in protection will trigger for short circuit, over-current, over-voltage or over-temperature if the connected equipment draws more than 1A continuously.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.