Kenuco 12V 1A-2A Power Adapter 5.5mm×2.1mm

12 V 1 A–2 A adapter with 5.5 mm × 2.1 mm plug

This compact AC adapter supplies 12 V DC at up to 2 A through a 5.5 mm × 2.1 mm male barrel connector. It suits routers, small hubs, LED strips and similar low-power DC devices that use this common centre-positive jack. The wall-mount body keeps outlets free and the integrated cord allows flexible placement. Built-in overload, short-circuit and over-temperature protection helps safeguard connected equipment.

Universal 100–240 V 50/60 Hz input

The adapter accepts mains voltages from 100 V to 240 V at 50 Hz or 60 Hz, so it works on household supplies worldwide without a separate voltage selector. No manual switching is required; the unit auto-ranges across the full band. This makes it convenient for travel or for equipment that moves between regions. The wide input range also tolerates normal line-voltage variation without affecting the 12 V output.

2 A maximum continuous current

At 12 V the adapter delivers up to 2 A, giving 24 W of usable power for devices rated within that envelope. Loads drawing 1 A or less run with ample headroom; sustained draws near 2 A are supported but leave no margin for startup surges. Equipment requiring more than 2 A at 12 V, or a different voltage or connector polarity, cannot be powered by this unit.