We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two small green circuit boards with USB-C ports and screw terminals

KEHIPI

KEHIPI ZY12PDN USB-C PD Trigger Module 2PCS 100W 20V Screw Terminal

SKU CH-B82V-K1VKW

Two USB-C PD trigger modules with screw terminals deliver up to 100 W at 20 V for PD 2.0 and 3.0 sources

  • ColorZY12PDN With Screw Terminal
  • Triggers up to 20 V from PD 2.0/3.0 sources
  • Delivers up to 100 W through screw terminals
  • Supports adjustable 3–20 V output for flexible projects
  • Pack includes two modules for dual-channel setups
  • Professional-grade decoy trigger — not for QC or non-PD gear

KEHIPI ZY12PDN USB-C PD Trigger Module 2PCS

This KEHIPI module triggers USB-C Power Delivery to deliver adjustable DC voltage through screw terminals. It supports PD 2.0 and 3.0 specifications with a power rating up to 100W and current up to 5A. The pack contains two units intended for custom power projects.

Suitable uses and limitations

Makers needing variable voltage from a PD source for prototypes or repairs will find this useful. It only triggers PD decoy voltages and does not support Quick Charge or other fast-charge protocols. Buyers needing QC triggering or a simple plug-and-play cable should look elsewhere.

100W PD 2.0 and 3.0 voltage triggering

The module negotiates any voltage from 3V to 20V that complies with the PD 2.0 specification. After triggering, the output must only connect to equipment rated for the selected voltage. Professional knowledge is required to avoid damaging connected devices.

Highlights

  • Triggers up to 20 V from PD 2.0/3.0 sources
  • Delivers up to 100 W through screw terminals
  • Supports adjustable 3–20 V output for flexible projects
  • Pack includes two modules for dual-channel setups
  • Professional-grade decoy trigger — not for QC or non-PD gear

Specifications

BrandAITRIP
ModelZY12PDN
ColorZY12PDN With Screw Terminal

Questions about this item

What physical connections does the ZY12PDN module need for power input and output?

The module has a USB-C input for the PD source and a screw terminal block for the DC output wires, supplied as a two-piece set.

How is the ZY12PDN module wired, and what common mistake should be avoided?

Connect a PD charger to the USB-C port and attach load wires to the screw terminals, observing polarity; the unit only triggers PD voltages and will not work with QC chargers or USB-A to USB-C cables.

What ongoing checks does the ZY12PDN module require after installation?

Verify the screw terminals stay tight and that the connected load never exceeds the 5 A or 20 V limits, since the board has no internal protection for over-voltage or over-current conditions.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.