We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black SATA to USB 3.0 adapter cable for 2.5 inch SSD, short male-to-female connector with LED indicator

KEHIPI

KEHIPI SATA to USB 3.0 Adapter 2.5" SSD 5 Gbps

SKU CH-E2PT-BZTEA

Connects a 2.5 inch SATA SSD to a USB 3.0 port for 5 Gbps data transfer and up to 2 TB capacity

  • TypeSATA
  • ColorBlack
  • Terminal GenderMale
  • Speed5 gigabits_per_second
  • ConductorCopper
  • FeaturesData Transfer
  • Expand drive space with a 2.5 inch SSD adapter
  • Transfer data at up to 5 Gbps theoretical speed
  • Hot-swap support with plug-and-play operation
  • Works with Windows, Mac, ChromeOS and Linux
  • Compact six-inch cable for easy portability

SATA to USB 3.0 Adapter for 2.5" SSD

This adapter connects a 2.5 inch SATA SSD to a USB-A port on computers, laptops or tablets. It suits users who want to expand storage, upgrade a system, back up files or recover data from an old drive. The device supports drives up to 2 TB and works with Windows, Mac OS, ChromeOS and Linux without extra drivers. It does not accept 2.5 or 3.5 inch HDDs, IDE, mSATA or M.2 devices.

Thermals noise and power draw

The cable draws power directly from the USB port so no external adapter is required. Its short six inch length and copper conductors keep resistance low during normal file transfers. An LED shows drive activity and the plug-and-play design enables hot swap operation without software overhead. The compact form stays cool under typical intermittent use.

Sustained load behaviour

Under continuous read or write workloads the USB 3.0 interface delivers a theoretical 5 Gbps ceiling with tested sequential reads up to 420 MB/s. Actual throughput depends on the attached SSD and host controller capability. The adapter maintains stable operation for extended cloning or backup sessions while the activity LED provides constant status feedback.

Highlights

  • Expand drive space with a 2.5 inch SSD adapter
  • Transfer data at up to 5 Gbps theoretical speed
  • Hot-swap support with plug-and-play operation
  • Works with Windows, Mac, ChromeOS and Linux
  • Compact six-inch cable for easy portability

Specifications

BrandCLAVOOP
ModelCL-CM33-1
TypeSATA
ColorBlack
Terminal GenderMale
Speed5 gigabits_per_second
ConductorCopper
FeaturesData Transfer

Questions about this item

How do I connect the KEHIPI adapter to a 2.5" SATA SSD and what step is often missed?

Plug the SATA male connector into the SSD first, then insert the USB 3.0 plug into the computer; the step often missed is confirming the drive is a 2.5" SATA SSD, not a 2.5" HDD or other interface, as this adapter only supports 2.5" SATA SSDs up to 2TB.

What maintenance or replacement will the KEHIPI SATA to USB 3.0 Adapter need over time?

No scheduled maintenance is required; the adapter has no moving parts, but the 6‑inch copper cable and USB‑A plug can wear from repeated insertion, so replace the unit if the connector becomes loose or the LED no longer shows drive activity.

What limit appears first when copying large files continuously with this 5 Gbps adapter?

The practical ceiling is the drive's own sustained transfer rate; tests show up to 420 MB/s read, but actual throughput depends on the SSD capability and the host USB 3.0 port, so the drive or host controller typically bottlenecks before the adapter's 5 Gbps link.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.