We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular adapter with USB 3.0 cable and power brick for 2.5 and 3.5 inch drives

KEHIPI

KEHIPI SA01 SATA IDE to USB 3.0 Adapter with 12V Power Adapter

SKU CH-YGTF-7T152

Connects 2.5" and 3.5" SATA or IDE drives to USB 3.0 with offline one-touch cloning and 12V power adapter

  • ColorBlack
  • Connector DetailUsb 3.0
  • ConductorAluminum
  • Offline clone without a computer using one-touch button
  • Connect 2.5" and 3.5" SATA or IDE drives simultaneously
  • Plug-and-play operation with no driver installation required
  • Works with Windows, Mac OS and Linux systems
  • USB 3.0 delivers up to 5Gbps transfer speed

KEHIPI SA01 SATA IDE to USB 3.0 Adapter

The KEHIPI SA01 is a SATA and IDE hard drive adapter that connects 2.5 inch and 3.5 inch drives to a computer through a USB 3.0 port. It includes a 12V 2A power adapter for 3.5 inch drives and supports simultaneous connection of two drives for data transfer or backup.

Suits users cloning drives offline without

Offline cloning works only from an IDE source to a SATA target or from one SATA source to a SATA target, and the target must be larger than the source. Buyers who need to clone between two IDE drives or from a larger drive to a smaller one should look elsewhere.

Sustained transfers run at USB 3.0 5Gbps speeds

The aluminium conductor and plug-and-play design support hot swapping and continuous operation across Windows, Mac OS and Linux. LED indicators show 25, 50, 75 and 100 percent progress during clone jobs so you can monitor long sessions at a glance.

Highlights

  • Offline clone without a computer using one-touch button
  • Connect 2.5" and 3.5" SATA or IDE drives simultaneously
  • Plug-and-play operation with no driver installation required
  • Works with Windows, Mac OS and Linux systems
  • USB 3.0 delivers up to 5Gbps transfer speed

Specifications

BrandKEHIPI
ModelSA01
ColorBlack
Connector DetailUsb 3.0
ConductorAluminum

Questions about this item

What type of drive do I need to connect as the target for the one-touch clone function to work?

The clone button only works when a SATA drive is connected to the SATA2 port as the target; the source can be IDE or a SATA drive on the SATA1 port, but both source ports cannot be used at the same time.

Will my older IDE hard drive work with this adapter alongside a modern SATA SSD?

Yes, the adapter supports simultaneous connection of one IDE drive and one SATA drive, and includes a 4-pin power cable and 12V 2A power adapter to run 3.5-inch IDE or SATA drives.

How can I confirm the offline clone has finished successfully?

When the clone process completes, all four blue LED indicators — 25%, 50%, 75% and 100% — will light up at the same time.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.