We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black rectangular controller with two four-pin ports and a silver 44-button RF remote

KEHIPI

KEHIPI RF LED Strip Controller 2-Port 44-Key 12V 6A

SKU CH-QNZS-GNRS1

RF remote controls two 4-pin RGB LED strips up to 50 feet through walls with 44-key colour, brightness and mode selection

  • RF remote works through walls up to 50 feet
  • 44-key remote selects 20 colours and 8 light patterns
  • Six DIY presets store custom colour sequences
  • Two 4-pin ports drive two LED strips simultaneously
  • 12 V 6 A rating powers SMD 5050 2835 3528 strips

RF LED Strip Controller

The KEHIPI RF LED Strip Controller is a 2-port remote dimmer that drives SMD 5050, 3528 and 2835 RGB strips from a 12 V supply. A 44-key radio-frequency handset operates through walls up to about 50 feet, offering 20 static colours, eight dynamic patterns and six user-programmable DIY slots. Each output handles a maximum of 6 A, so two reels can be run simultaneously from one controller.

Upgrade from IR dimmers

Infrared remotes require line of sight and fail behind cabinets or ceilings; this RF unit removes that limitation while keeping the same 4-pin connector. The jump is worth it when strips are installed in coves, behind TVs or inside signage where an IR beam cannot reach. No new wiring standard is introduced — existing 4-pin RGB tape plugs straight in.

Suits installers needing multi-zone RF control

Homeowners lighting kitchen plinths, retail displays or bedroom coves benefit from the 500 cm range and dual-port convenience. Buyers who need more than 6 A per channel, 24 V operation, DMX or smart-home integration should look at a different controller class. This unit is limited to 12 V RGB loads and the supplied 44-key handset.

Highlights

  • RF remote works through walls up to 50 feet
  • 44-key remote selects 20 colours and 8 light patterns
  • Six DIY presets store custom colour sequences
  • Two 4-pin ports drive two LED strips simultaneously
  • 12 V 6 A rating powers SMD 5050 2835 3528 strips

Specifications

BrandSUPERNIGHT

Questions about this item

What connector does the 2-port controller use for SMD 5050, 2835 and 3528 strips?

It uses a 4-pin connector compatible with those RGB strip types.

How is the controller wired to the 12 V supply and strips?

Connect the DC 12 V input to the controller then plug one or two 4-pin strip cables into the two output ports.

When should the remote's battery be changed?

Replace the battery when the remote no longer operates the strips reliably across the room.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.