KEHIPI
KEHIPI R7S 118mm T3 500W 120V 8300lm 5 Pack Halogen Standard Bulb
A five-pack of 118 mm R7S halogen bulbs delivering 8300 lm at 500 W, dimmable from 100 % to 10 % with a 2000-hour lifespan
- TypeHalogen
- ColorWarm White
- Super bright 8300 lumen output for powerful illumination
- 2000-hour lifespan reduces replacement frequency
- 360° beam angle with CRI 100 for accurate colours
- Dimmable from 100% to 10% for flexible lighting
- Standard 118mm R7S base fits compatible fixtures easily
Halogen Work & Security Lighting
These KEHIPI R7S T3 halogen bulbs deliver 8300 lumens each at 500 watts and 120 volts for floodlights, work lamps, security fixtures and landscape lighting. The 118 mm double-ended base clicks into compatible R7S sockets for quick replacement. A five-pack supplies multiple fixtures or keeps spares on hand.
Sustained Output & Dimming Range
Rated for an average 2000-hour lifespan, the lamps maintain steady output during long shifts rather than fading after a brief burst. They dim smoothly from 100 percent down to 10 percent, letting you match light levels to the task without flicker. Instant-on at full brightness means no warm-up delay when the circuit is energised.
R7S Base & Length Constraint
The 118 mm (4.65 in) overall length and 9.5 mm diameter fit standard J-type R7S sockets only; the shorter 78 mm version will not seat correctly. Verify the fixture accepts this exact length before ordering. The 360-degree beam angle distributes light evenly in omnidirectional fittings.
Highlights
- Super bright 8300 lumen output for powerful illumination
- 2000-hour lifespan reduces replacement frequency
- 360° beam angle with CRI 100 for accurate colours
- Dimmable from 100% to 10% for flexible lighting
- Standard 118mm R7S base fits compatible fixtures easily
Specifications
| Brand | TAIYALOO |
|---|---|
| Type | Halogen |
| Color | Warm White |
Questions about this item
How much heat does a 500W halogen bulb put out when it runs all day?
A 500W halogen converts most of its power into heat, so the fixture and surrounding area will become very hot during extended use. Ensure the fitting is rated for 500W and keep flammable materials well clear.
What fixture base and voltage must I already have for these R7S bulbs to work?
You need a double-ended R7S socket that accepts a 118mm T3 lamp and a mains supply of 110V, 120V or 130V. Verify the fixture length before ordering.
Can I mix these 2700K 8300lm bulbs with older halogen lamps on the same dimmer?
Yes, they are dimmable from 100% down to 10% and share the same 2700K warm white colour, so they blend smoothly with existing halogen lamps on a compatible dimmer.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



