We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver rectangular IP67 power adapter with 3-prong plug and 3.3 feet cable

KEHIPI

KEHIPI PFH-60W-12V 60 W 12 V IP67 power adapter

SKU CH-SZ8R-4AHE3

Converts 100-265 V AC to 12 V DC at 60 W with IP67 waterproof housing and automatic fault recovery

  • TypeModern
  • ColorSilver
  • Dimensions6.62 in x 1.89 in x 1.34 in
  • Powers 12 V LED strips up to 60 W total load
  • Survives rain and dust with IP67 rated aluminium housing
  • Runs cool by convection from minus 20 to plus 60 degrees C
  • Auto-recovers from short circuit overload over-voltage over-current over-temperature faults
  • Accepts worldwide 100 to 265 V AC input at 47 to 63 Hz

KEHIPI 60 W 12 V IP67 power adapter

This sealed 60 W unit converts 100–265 V AC at 47–63 Hz into a steady 12 V DC output at up to 5 A. It suits single-colour or RGB LED strips, string lights, routers, hubs, switches, security cameras and audio gear that must stay under the 60 W limit. The aluminium housing meets IP67 for full outdoor exposure.

Passive cooling and protection

Heat leaves the encapsulated aluminium case by free-air convection, so there is no fan noise. Automatic hiccup-mode protection covers short circuit, overload, over-voltage, over-current and over-temperature, with auto-recovery once the fault clears. Efficiency reaches 88 percent across the universal input range.

Replaces open-frame or non-waterproof supplies

Builders moving LED projects from bench to garden, or swapping a failed indoor brick for a sealed outdoor unit, gain IP67 ingress protection and a wider –20 °C to +60 °C operating window. The jump is not worth it if the load exceeds 60 W or if a dimmable driver is required.

Highlights

  • Powers 12 V LED strips up to 60 W total load
  • Survives rain and dust with IP67 rated aluminium housing
  • Runs cool by convection from minus 20 to plus 60 degrees C
  • Auto-recovers from short circuit overload over-voltage over-current over-temperature faults
  • Accepts worldwide 100 to 265 V AC input at 47 to 63 Hz

Specifications

BrandNIYIPXL
ModelPFH-60W-12V
Part NumberPFH-60W-12V
TypeModern
ColorSilver
Dimensions6.62 in x 1.89 in x 1.34 in

Questions about this item

How do I mount the 6.62×1.89×1.34 in aluminium housing and where does the 3.3 ft cable reach?

Mount the silver case with its built-in flanges on any flat surface; the 3.3 ft output cable runs from the potted body to your 12 V DC load. Keep the 100-265 V AC inlet away from water.

What part of the PFH-60W-12V will need replacement first?

The internal electrolytic capacitors degrade over time, especially near the 60 °C upper ambient limit; expect several years of continuous operation before output ripple rises enough to require a new unit.

At what load does the 88 % efficiency limit cause thermal shutdown?

Sustained 5 A (60 W) output at 60 °C ambient pushes the convection-cooled case to its over-temperature trip; the hiccup protection cycles the unit off until it cools.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.