We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver rectangular IP67 LED driver with 3-prong plug and cable

KEHIPI

KEHIPI PFH-150W-12V 150W IP67 LED Driver Power Adapter

SKU CH-H586-G1Y6A

Waterproof IP67 150 W LED driver converts 85-265 V AC to 12 V DC at 12.5 A for outdoor strips and fixtures

  • TypeModern
  • ColorSilver
  • Dimensions7.67 in x 2.71 in x 1.57 in
  • Weight1.12 kilograms
  • 150 W output powers demanding LED installations
  • IP67 rating withstands rain and dust outdoors
  • 85–265 V AC input works worldwide
  • Auto-recovery protection guards against faults
  • 88 % efficiency reduces heat and energy waste

150W IP67 LED Driver

The KEHIPI PFH-150W-12V is a constant-voltage power supply that converts 85-265V AC input to a regulated 12V DC output at 12.5A. Its IP67-rated aluminium housing makes it suitable for outdoor lighting installations, computer projects and industrial environments where moisture or dust are present. The unit includes a 3.3-foot cable with a three-prong plug for immediate mains connection. It is not dimmable and works only with external RGB dimmers.

Capacity and headroom

Delivering 150W at 12.5A, the driver comfortably powers long LED strip runs, multiple 12V DC bulbs or mixed low-voltage loads within that limit. Efficiency reaches 88 percent, so waste heat stays manageable inside the sealed enclosure. Protection circuits cover short circuit, overload, over-voltage, over-current and over-temperature using hiccup-mode auto-recovery. Operating range spans -20 to +60 Celsius at 20-90 percent relative humidity.

Upgrade considerations

The adapter replaces non-waterproof or lower-wattage transformers when an installation moves outdoors or demands higher total load. Builders gain the IP67 seal, wider 85-265V AC input tolerance and the full protection suite in a single encapsulated block. The jump is worthwhile when the previous supply lacked environmental sealing, tripped on inrush current or could not sustain 150W continuous output. It does not suit projects that require built-in dimming or voltages other than 12V DC.

Highlights

  • 150 W output powers demanding LED installations
  • IP67 rating withstands rain and dust outdoors
  • 85–265 V AC input works worldwide
  • Auto-recovery protection guards against faults
  • 88 % efficiency reduces heat and energy waste

Specifications

BrandNIYIPXL
ModelPFH-150W-12V
Part NumberPFH-150W-12V
TypeModern
ColorSilver
Dimensions7.67 in x 2.71 in x 1.57 in
Weight1.12 kilograms

Questions about this item

Will this 150 W driver run on the same 85–265 V AC circuit I already use for older 12 V LED strips?

Yes, the unit accepts 85–265 V AC at 47–63 Hz and delivers 12 V DC at up to 12.5 A, so it matches the voltage range of existing 12 V installations.

How can I confirm the PFH-150W-12V is operating correctly once installed?

Measure the output with a multimeter; it should read a steady 12 V DC under load, and the aluminium case should stay warm but not exceed the 60 °C rated limit.

What comes in the box and what extra items are needed for an outdoor IP67 install?

The package contains one 150 W waterproof driver with a 3.3 ft input cable and 3-prong plug; you must supply suitable 12 V LED loads, waterproof wire connectors and mounting hardware.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.