We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Five tiny green circuit boards with USB-C ports, 17.6 by 10.2 mm

KEHIPI

KEHIPI PDC004 PD Decoy Module 20V 5A 5 pcs

SKU CH-7CF7-6BZ2C

A pack of five USB-C PD decoy modules that negotiate a fixed 20 V output at up to 5 A for powering projects or adapting legacy hardware

  • Color5PCS 20V
  • Triggers 20 V from USB-C PD sources using 2721 chip
  • Delivers up to 5 A with E-marked cable for projects
  • Protects circuitry against VBUS-to-CC short during testing
  • Operates from -25 °C to 85 °C at 5–95 % RH
  • Compact 17.6 × 10.2 × 4.2 mm module fits tight spaces

Fixed 20V PD decoy module

KEHIPI PDC004 is a fixed 20V USB-C Power Delivery decoy module that uses a 2721 hardware PD chip to negotiate a 20V contract up to 5A from a compliant PD source. The module passes the negotiated voltage directly to the output and cannot change voltage or be firmware-upgraded. It is supplied in a pack of five units for makers and engineers who need a repeatable 20V rail.

Makers needing a single 20V rail.

The module suits developers powering electronic projects, converting legacy hardware to USB-C input, or testing PD sources where a fixed 20V 5A contract is required. It will not suit projects that need 5V, 9V, 12V or any other voltage rail, nor will it work with chargers that only support Qualcomm Quick Charge or lack the requested 20V PDO. An electronically marked Type-C cable is required for currents above 3A.

2721 hardware PD chip locks voltage to 20V

The 2721 hardware PD chip performs the PD negotiation and fixes the output at 20V with no provision for voltage selection or firmware updates. Operating temperature range is -25 to 85°C at 5 to 95% RH, and the board measures 17.6 by 10.2 by 4.2 mm.

Highlights

  • Triggers 20 V from USB-C PD sources using 2721 chip
  • Delivers up to 5 A with E-marked cable for projects
  • Protects circuitry against VBUS-to-CC short during testing
  • Operates from -25 °C to 85 °C at 5–95 % RH
  • Compact 17.6 × 10.2 × 4.2 mm module fits tight spaces

Specifications

BrandAITRIP
ModelPDC004
Color5PCS 20V

Questions about this item

How do I install the PDC004 module and which step is most often missed?

Connect the Type-C female input to a USB PD power source using an electronically marked cable for currents above 3A; the step often missed is confirming the charger actually supports 20V output, otherwise it will fall back to a lower voltage.

What maintenance or replacement will the PDC004 module need later?

The module uses a fixed 2721 hardware PD chip that cannot be upgraded or re-flashed; if the voltage requirement changes or the chip fails, the entire decoy must be replaced.

What limit appears first during sustained use of the PDC004 module?

The operating temperature range tops out at 85°C; prolonged loads near the 5A rating in warm enclosures will hit this thermal ceiling before any electrical limit.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.