We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten gold-plated 4mm banana plugs in five colours, spring-loaded terminals, PA6 housings

KEHIPI

KEHIPI P10064-5C10PCS 4mm Banana Plug 32A 250V 10PCS Five Colors

SKU CH-8KM4-KZPY8

Ten gold-plated 4 mm banana plugs rated 32 A / 250 V accept 0.2–2.5 mm² wire via a stainless-steel spring clamp inside a V0-rated PA6 housing

  • Gold-plated phosphor-bronze tips deliver low-resistance, stable current flow
  • 32 A / 250 V rating handles high-power test and automotive leads
  • PA6 V0 housing resists flame and deformation up to 85 °C
  • Push-button spring clamp accepts 0.2–2.5 mm² wire without tools
  • Ten colour-coded plugs simplify circuit identification in multi-channel setups

Five-colour 4 mm banana plugs

This pack contains ten straight-blade banana plugs rated at 32 A and 250 V. The contacts are phosphor bronze with 2.0 M pure gold plating over brass, and the spring is 301 stainless steel. Insulation uses PA6 nylon with a V0 flame-retardant rating and POM push-buttons. The plugs accept wire cross-sections from 0.2 to 2.5 mm² with a 10 mm stripping length.

Replaces screw-terminal or soldered connections

The push-button design lets you insert stripped wire to the bottom of the jack and lock it by releasing the button, removing the need for tools or solder. This is worth the change when you need quick, repeatable connections for test leads, speaker cables or prototype wiring that must stay secure under vibration. The gold-plated contact keeps resistance low over many mating cycles.

Limited to 32 A at 250 V and 85 °C

The plug housing and spring are rated for continuous operation up to 85 °C, so the assembly must not be used in environments that exceed this temperature. The 0.2–2.5 mm² wiring range sets the maximum conductor size, and the 32 A rating applies only when the contact is fully seated and the wire gauge is adequate. No higher voltage, current or temperature is supported by this design.

Highlights

  • Gold-plated phosphor-bronze tips deliver low-resistance, stable current flow
  • 32 A / 250 V rating handles high-power test and automotive leads
  • PA6 V0 housing resists flame and deformation up to 85 °C
  • Push-button spring clamp accepts 0.2–2.5 mm² wire without tools
  • Ten colour-coded plugs simplify circuit identification in multi-channel setups

Specifications

BrandGoupchn
Part NumberP10064-5C10PCS

Questions about this item

What wire cross-section range does the 4 mm banana plug accept?

The plug accepts wires from 0.2 to 2.5 mm², covering typical automotive and bench power leads.

How far must the insulation be stripped before inserting the wire into the push-button terminal?

Strip exactly 10 mm of insulation, open the button, push the conductor to the bottom, then release the button to lock it.

Which metal parts will eventually need replacement if the spring loses tension or the gold plating wears?

The internal 301 stainless-steel spring and the phosphor-bronze banana tip with 2.0 µm gold plating are the wear items.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.