Peerless Industrial Group
Peerless Industrial Group Tire Chains Single Bus & RV V-Bar PK2 QG2821
$67.99
0.00081572BTC
In stock
KEHIPI
KEHIPI Non-Contact Voltage Tester Dual Range 12V-1000V LCD (Full Red)
A non-contact voltage tester detects AC voltage from 12 V to 1000 V with dual-range sensitivity, LCD percentage display, and audible plus visual alerts
- Width3.9878 in
- Dual-range detection from 12 V to 1000 V AC for versatile electrical testing
- Audible and visual alarms increase frequency as voltage rises for immediate hazard awareness
- LCD shows signal-strength percentage and bar graph for intuitive voltage assessment
- CAT III 1000 V and CAT IV 600 V safety rating ensures protected operation
- Auto power-off after five minutes and low-battery indicator extend battery life
Voltage Tester for Electricians and Homeowners
The KEHIPI non-contact voltage tester detects AC voltage from 12 to 1000 volts across two selectable ranges. It identifies live and neutral wires without metallic contact, making it suitable for breakpoint tracing on outlets, terminal strips and supply cords. The tool is rated CAT III 1000V and CAT IV 600V for professional safety.
Dual Range Capacity and Detection Limits
High sensitivity mode covers 12V to 1000V AC for low-voltage circuits such as doorbells and thermostats. Low sensitivity mode starts at 70V to 1000V AC, reducing false triggers on standard mains wiring. A bar graph and percentage value show signal intensity, while a high-voltage alert activates above 90V with a red screen and warning symbol.
Thermals Noise and Power Draw
The tester runs on two 1.5V AAA batteries and powers off automatically after five minutes without operation or signal detection. A low-battery symbol appears when voltage drops below 2.5V, and the unit shuts down below 2.3V. Audible beeps increase in frequency as detected voltage rises or the probe nears the source, while the tip flashes red for live voltage and the screen stays green for null wire.
Highlights
- Dual-range detection from 12 V to 1000 V AC for versatile electrical testing
- Audible and visual alarms increase frequency as voltage rises for immediate hazard awareness
- LCD shows signal-strength percentage and bar graph for intuitive voltage assessment
- CAT III 1000 V and CAT IV 600 V safety rating ensures protected operation
- Auto power-off after five minutes and low-battery indicator extend battery life
Specifications
| Brand | KAIWEETS |
|---|---|
| Width | 3.9878 in |
Questions about this item
Can I use the 12 V low-sensitivity range on a doorbell circuit while keeping my 1000 V mains wiring live?
Yes — the dual-range selector lets you choose the 12 V–1000 V AC high-sensitivity mode for doorbells and thermostats, then switch to 70 V–1000 V AC for standard mains without removing the tester from the circuit.
How do I know the tester is detecting voltage correctly after I turn it on?
The LCD shows a bar graph and percentage value; the tip flashes red and the beeper sounds at a higher frequency as voltage rises, while the screen turns red for live wire above 90 V and green for null wire.
Does the box include batteries or do I need to buy AAA cells separately?
Two 1.5 V AAA batteries are required and are not included; a low-battery symbol appears at 2.5 V and the unit shuts off below 2.3 V.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
