KEHIPI
KEHIPI Non-Contact Voltage Tester 12-1000V AC Dual Range LCD Black
Detects AC voltage from 12 to 1000 volts without contact, showing signal strength as a percentage on an LCD that turns red for live wires and green for neutral
- Width4.0 in
- Dual-range detection covers 12 to 1000 V AC for versatile testing
- Percentage readout and bar graph show signal strength at a glance
- Audible and visual alerts increase with voltage proximity for safer work
- CAT III 1000 V and CAT IV 600 V ratings meet IEC safety standards
- Auto power-off after five minutes and low-battery indicator extend battery life
Non-Contact Voltage Detection
This tester identifies AC voltage from 12 to 1000 volts without touching conductors. It suits electricians and homeowners checking outlets, cords or lighting circuits. The tip flashes red and beeps when voltage is present, while the LCD shows a percentage bar graph for signal strength.
Dual Range And Alert Features
Two sensitivity modes cover 12-1000V and 70-1000V AC for doorbells, thermostats or mains wiring. A high-voltage warning activates above 90V, turning the screen red with a safety symbol. Auto power-off after five minutes and a low-battery indicator at 2.5V extend battery life.
CAT III 1000V CAT IV 600V Rating
The double-insulated housing meets IEC and CE standards for industrial and residential panels. It comfortably handles breaker panels and appliance circuits up to 1000V AC. It does not serve buyers needing DC measurement, continuity testing or current clamping functions.
Highlights
- Dual-range detection covers 12 to 1000 V AC for versatile testing
- Percentage readout and bar graph show signal strength at a glance
- Audible and visual alerts increase with voltage proximity for safer work
- CAT III 1000 V and CAT IV 600 V ratings meet IEC safety standards
- Auto power-off after five minutes and low-battery indicator extend battery life
Specifications
| Brand | KAIWEETS |
|---|---|
| Width | 4.0 in |
Questions about this item
How often will the two AAA batteries need replacing during regular use?
The tester runs on two 1.5 V AAA cells and shows a low-battery symbol when voltage drops below 2.5 V; it shuts down automatically below 2.3 V, so expect to swap batteries when that indicator appears.
At what voltage does the high-voltage alert activate during continuous testing?
The high-voltage alert triggers at 90 V AC — above that level the screen turns red and the safety symbol flashes to warn of hazardous potential.
Does the LCD backlight or audible beeper add noticeable heat or drain during all-day operation?
Auto power-off engages after five minutes without a signal, limiting both heat build-up and battery drain during extended sessions.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



