We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Five tiny green circuit boards each with a USB-C port and a blue potentiometer

KEHIPI

KEHIPI MT3608 Type-C Boost Module 5pcs 2A 2V-24V to 5V-28V

SKU CH-C1RV-X4W7Q

Pack of five MT3608 boost modules with Type-C input, stepping 2 V–24 V up to 5 V–28 V at 2 A with 93 % efficiency

  • Color5 PCS Type-C
  • Adjustable 5 V–28 V output from 2 V–24 V input
  • 2 A peak current suits DIY power projects
  • 93 % efficiency reduces heat loss
  • Compact 30 × 17 × 6 mm board fits tight enclosures
  • Type-C input simplifies connection to common USB sources

Five-Module Boost Pack

This pack contains five MT3608 boost converter boards with Type-C input connectors. Each module steps up DC voltages from 2 V to 24 V input to an adjustable 5 V to 28 V output at up to 2 A. The boards measure 30 mm by 17 mm by 6 mm and include under-voltage lockout, current limiting and thermal overload protection. They suit hobbyists and engineers building compact adjustable supplies.

Makers Needing Step-Up Only

These modules only increase voltage, so they cannot power loads that require a lower voltage than the source provides. Buyers who need step-down or buck-boost conversion should look at different topologies. The 2 A peak current limit also rules out higher-power applications such as driving large motors or charging multiple devices simultaneously. Projects demanding more than 28 V output will need another solution.

2 A Peak Output Current

The single specification that decides fit is the 2 A maximum output current. If the load draws more than this, the module will trigger its protection and shut down. Verify the target device’s current demand before purchasing.

Highlights

  • Adjustable 5 V–28 V output from 2 V–24 V input
  • 2 A peak current suits DIY power projects
  • 93 % efficiency reduces heat loss
  • Compact 30 × 17 × 6 mm board fits tight enclosures
  • Type-C input simplifies connection to common USB sources

Specifications

BrandAITRIP
ModelMT3608
Color5 PCS Type-C

Questions about this item

What input voltage range must my power source provide for the MT3608 module to operate?

The module accepts an input voltage from 2 V up to 24 V, so any DC source within that range will work.

Can I run the MT3608 from a 15 V legacy supply and still get a regulated 12 V output for older gear?

Yes, with a 15 V input the adjustable potentiometer can set the output to 12 V as long as the load stays within the 2 A limit.

How do I verify the MT3608 is delivering the correct voltage after I solder it into my project?

Measure the output pins with a multimeter while the input is powered; the reading should match the voltage you set on the potentiometer.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.