KEHIPI
KEHIPI MT3608 DC-DC Boost Converter 2A 2V-24V to 5V-28V Power Adapter 5pcs
Pack of five MT3608 step-up modules converting 2 V to 24 V input into 5 V to 28 V output at up to 2 A with 93 % efficiency
- Color5 PCS
- Adjustable 5 V–28 V output from 2 V–24 V input
- Up to 2 A peak current for small loads
- 93 % maximum conversion efficiency
- Compact 36 × 17 × 14 mm board fits tight spaces
- Potentiometer sets precise output voltage above input
DC-DC boost module pack
The KEHIPI MT3608 pack supplies five adjustable step-up converters for hobbyists and engineers who need a higher voltage rail from a low-voltage source. Each board accepts 2 V to 24 V in and delivers up to 28 V out at a maximum of 2 A.
Capacity and headroom
With peak efficiency of 93 % the modules handle typical loads such as 9 V, 12 V, 18 V or 24 V outputs from a USB power adapter. The 2 A current ceiling limits sustained power, so high-wattage applications will exceed the thermal and current headroom of these boards.
Build integration
Measuring 36 mm by 17 mm by 14 mm, the modules fit tight protoboard layouts and leave ample space for neighbouring components. A multi-turn potentiometer sets the output voltage above the input level, and the micro USB input simplifies bench testing without soldering a dedicated supply.
Highlights
- Adjustable 5 V–28 V output from 2 V–24 V input
- Up to 2 A peak current for small loads
- 93 % maximum conversion efficiency
- Compact 36 × 17 × 14 mm board fits tight spaces
- Potentiometer sets precise output voltage above input
Specifications
| Brand | AITRIP |
|---|---|
| Model | 0687117712936 |
| Part Number | EC16961 |
| Color | 5 PCS |
Questions about this item
Will the MT3608 module work with a 5 V Arduino supply and still deliver 12 V to my sensor?
Yes, the input range is 2 V to 24 V and the output can be set up to 28 V, so a 5 V USB feed can be boosted to 12 V for the sensor.
How do I confirm the MT3608 is regulating at the voltage I set?
Measure the output pins with a multimeter while turning the onboard potentiometer; the reading should match the desired voltage and stay steady under load.
The listing says 20 modules — are headers or USB cables included?
The package contains 20 bare MT3608 step-up boards only; pin headers, micro-USB cables and any mounting hardware must be sourced separately.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



