We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular black power adapter with attached Starlink power cord

KEHIPI

KEHIPI I1830 12V (10-36V) to 57V 4.5A DC Step Up Power Adapter

SKU CH-08BV-EJQDM

A step-up adapter converts 10-36 V DC to 57 V at 4.5 A for Starlink Gen 3 routers and includes a 3.28 ft power cord

  • Weight1 lb
  • Converts 10-36 V vehicle power to 57 V for Starlink Gen 3 router
  • Delivers 4.5 A continuous output for reliable satellite internet operation
  • Built-in overcurrent, overvoltage and short-circuit protection safeguards connected equipment
  • Includes 3.28 ft Starlink power cord for direct Gen 3 router connection
  • Weighs 1 lb for easy transport in cars, RVs, boats or golf carts

Starlink Gen 3 12V to 57V Boost Converter

The KEHIPI I1830 is a DC step-up power adapter that converts a 10-36V input into a regulated 57V 4.5A output for the Starlink Gen 3 router. It includes a dedicated Starlink power cord and integrates multiple protection circuits against overcurrent, overvoltage and short circuit. The unit weighs 1 lb and is intended for mobile and outdoor installations.

Suited for Mobile and Off-Grid Starlink Users

This adapter suits owners who need to run a Starlink Gen 3 router from vehicle, RV, boat or golf-cart power systems. It is not for users who require an AC-input power supply, nor for anyone operating outside the 10-36V DC input range. Buyers needing a different output voltage or higher current capacity should look at alternative converters.

57V 4.5A Fixed Output Determines Compatibility

The single specification that decides fit is the fixed 57V 4.5A output delivered through the supplied Starlink connector. The router must accept exactly this voltage and current; any deviation means the adapter will not power the device correctly. No other rating in the data changes this requirement.

Highlights

  • Converts 10-36 V vehicle power to 57 V for Starlink Gen 3 router
  • Delivers 4.5 A continuous output for reliable satellite internet operation
  • Built-in overcurrent, overvoltage and short-circuit protection safeguards connected equipment
  • Includes 3.28 ft Starlink power cord for direct Gen 3 router connection
  • Weighs 1 lb for easy transport in cars, RVs, boats or golf carts

Specifications

BrandEAGWELL
ModelI1830
Part NumberI160456TG
Weight1 lb

Questions about this item

How do I confirm the KEHIPI I1830 is delivering 57 V at 4.5 A to my Starlink Gen 3 router after installation?

Measure the DC output with a multimeter set to volts; it should read 57 V under load. The router's status light will show solid white when the boost converter is supplying stable power from the 10-36 V vehicle supply.

What cables and connectors are included with the I1830 and what must I source separately?

The box contains the step-up adapter with a 3.28 ft Starlink power cord attached. You must provide the 12 V vehicle power source — car, RV, boat or golf-cart battery — and any ring terminals or Anderson plugs needed to connect the adapter's input leads.

Which version of the KEHIPI boost converter should I choose for a Starlink Gen 3 system?

Select the I1830 model (part number I160456TG) rated 10-36 V in to 57 V 4.5 A out; it is the only variant listed for Gen 3 routers and outdoor vehicle use.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.