We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular aluminium box with sealed silicone finish, input and output terminals visible

KEHIPI

KEHIPI EAGWELL 12V to 24V 240W 10A Step Up Converter power adapter

SKU CH-EDJS-4KCFE

Converts 11–16 V DC input to a regulated 24 V 10 A 240 W output with 96 % efficiency, IP68 sealing and built-in overload, over-temperature and short-circuit protection

  • Weight1 lb
  • Steps 12 V input up to 24 V output at 240 W
  • Accepts 11 V to 16 V DC input range
  • Delivers 10 A continuous current for high-power loads
  • IP68 rated with silicone sealing for waterproof dustproof operation
  • Built-in overload overcurrent overtemperature and short-circuit protection

KEHIPI EAGWELL 12V to 24V Boost Converter

This step-up converter raises a 12V DC source to a regulated 24V DC output at up to 10A continuous current. It is built for operators of golf carts, RVs, solar arrays, heavy vehicles and LED installations that need reliable 24V power from a 12V system.

Check input range and load before ordering

The unit accepts a DC input between 11V and 16V, so verify your battery or supply stays within that window under load. Confirm the connected equipment draws no more than 10A at 24V, and ensure wiring and fuses are rated for the 240W maximum throughput.

Aluminium shell with IP68 potting

The converter is encapsulated in high-heat-conductivity silica gel inside an aluminium housing, giving full waterproof, dustproof and shock-resistant protection. Synchronous rectification delivers up to 96% conversion efficiency, reducing heat and extending service life in harsh mobile or outdoor environments.

Highlights

  • Steps 12 V input up to 24 V output at 240 W
  • Accepts 11 V to 16 V DC input range
  • Delivers 10 A continuous current for high-power loads
  • IP68 rated with silicone sealing for waterproof dustproof operation
  • Built-in overload overcurrent overtemperature and short-circuit protection

Specifications

BrandEAGWELL
Model11-16V to 24V 10A
Part NumberI1600
Weight1 lb

Questions about this item

Does the converter come with cables or do I need to buy them separately?

The unit is supplied as the converter only; input and output cables are not included and must be sourced separately.

Which input voltage range should I match to my 12 V system?

The converter accepts 11 V to 16 V DC input, so a standard 12 V battery or vehicle supply falls within the supported range.

What does the 96 % efficiency figure mean for heat and battery drain?

At 96 % efficiency only about 4 % of the 240 W output is lost as heat, reducing wasted power and extending battery run-time.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.