KEHIPI
KEHIPI Dual Band WiFi Antenna RP-SMA 10dBi 7.7in 4pcs
Dual-band 2.4 GHz and 5.8 GHz omnidirectional antennas with 10 dBi gain and RP-SMA connectors for routers, cards and cameras
Option 4-pack
- 4-pack
- 2-pack
- Dual-band 2.4 GHz and 5.8 GHz coverage for wider device compatibility
- 10 dBi gain boosts signal reach across 2400‑2500 MHz and 4900‑5900 MHz
- Omni-directional pattern radiates evenly without precise aiming
- Gold-plated RP‑SMA male swivel connector ensures solid 50 ohm contact
- 7 inch length fits routers, PCIe cards, USB adapters and cameras
Dual-band RP-SMA antenna set
The KEHIPI antenna kit contains four omni-directional units that operate on 2.4 GHz and 5.8 GHz bands with 10 dBi gain. Each antenna measures 7.7 inches and terminates in a gold-plated RP-SMA male swivel connector. The 50 ohm impedance matches standard Wi-Fi equipment. They are intended for routers, PCIe cards, USB adapters, cameras and FPV gear.
Upgrade from lower-gain stock antennas
Replacing 2 dBi to 5 dBi rubber-duck antennas with these 10 dBi models can extend usable range and improve link stability for distant clients. The jump is worthwhile when the existing antennas cannot reach a remote room, outdoor camera or drone controller. No benefit appears if the current signal is already strong or if the device lacks RP-SMA ports.
Build integration needs RP-SMA ports
Each antenna screws directly onto any RP-SMA female jack found on compatible routers, wireless cards, USB dongles or camera transmitters. The swivel base lets you orient the whip vertically for best omni-directional coverage. Four units allow simultaneous upgrade of a dual-band router and a client device. Devices with internal-only antennas or different connector types cannot use this kit.
Highlights
- Dual-band 2.4 GHz and 5.8 GHz coverage for wider device compatibility
- 10 dBi gain boosts signal reach across 2400‑2500 MHz and 4900‑5900 MHz
- Omni-directional pattern radiates evenly without precise aiming
- Gold-plated RP‑SMA male swivel connector ensures solid 50 ohm contact
- 7 inch length fits routers, PCIe cards, USB adapters and cameras
Specifications
No published specifications for this item yet.
Other versions of this model
1 more in the same range
Same family, different memory, cooler or clock — compare before you commit.
Questions about this item
Will the 7.7 inch RP-SMA male connector fit my ASUS RT-AC68U router?
Yes, the RP-SMA male connector screws directly into the RP-SMA female ports on the ASUS RT-AC68U and RT-AC88U routers without adapters.
How do I install the antenna correctly, and what step is often missed?
Screw the gold-plated RP-SMA connector clockwise until snug, then pivot the swivel hinge to point the antenna vertically for best omni-directional coverage.
When should I replace these 10 dBi antennas?
Replace them if the gold-plated RP-SMA threads strip, the swivel hinge loosens, or the radome cracks, which degrades the 50 ohm impedance match.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
