We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

KEHIPI

KEHIPI Cat 6 network ethernet cable 35ft Blue 10Gbps 550 MHz

SKU CH-2M8Z-GF7F4

A 35 ft Cat 6 patch cable rated for 10 Gbps at 550 MHz with gold-plated RJ45 connectors and strain-relief boots

  • TypeCat 6
  • Cat6
  • Connector ARJ45
  • ColorBlue
  • Features, , , ,
  • Supports 10 Gbps speeds with 550 MHz bandwidth
  • 24 AWG bare copper core for reliable signal quality
  • Gold-plated RJ45 contacts resist corrosion and ensure solid connection
  • Snagless strain-relief boots protect the latch during routing
  • Backwards compatible with existing Cat 5 network infrastructure

35 ft Cat 6 cable for LAN wiring

This 35 ft Cat 6 Ethernet cable uses 24 AWG bare copper conductors and gold-plated RJ45 connectors with strain-relief boots. It provides a wired connection for PCs, servers, printers, routers and similar LAN components. The blue jacket helps identify the run in a patch panel or desk setup.

10 Gbps up to 550 MHz on unshielded Cat 6

The cable meets the TIA/EIA 568-C.2 Category 6 standard and is rated for 10 Gbps data transfer at 550 MHz bandwidth. As an unshielded UTP design, it does not protect against external electromagnetic interference. The 10 Gbps rate is achievable only over the shorter distances allowed by the Cat 6 standard for that speed.

Check port speed and maximum run length

Verify that your router, switch and network adapters support the desired Gigabit or 10 Gigabit rates. Confirm the total installed length stays within the Cat 6 limit for 10 Gbps operation, otherwise the link will fall back to 1 Gbps. The snagless boots need enough clearance to latch securely without catching on adjacent cables.

Highlights

  • Supports 10 Gbps speeds with 550 MHz bandwidth
  • 24 AWG bare copper core for reliable signal quality
  • Gold-plated RJ45 contacts resist corrosion and ensure solid connection
  • Snagless strain-relief boots protect the latch during routing
  • Backwards compatible with existing Cat 5 network infrastructure

Specifications

BrandCable Matters
TypeCat 6
Cat6
Connector ARJ45
ColorBlue
Features, , , ,

Questions about this item

Is 35 ft the only length available for this Cat 6 cable?

The listing shows a single 35 ft option with a 24 AWG copper core and gold-plated RJ45 connectors.

What does the 10 Gbps rating mean when I plug this cable into my router?

It supports 10-Gigabit Ethernet up to the full 35 ft run, provided both ends negotiate 10 Gbps.

Does the 550 MHz bandwidth cap the speed on a 10 Gbps port?

The 550 MHz frequency rating meets the TIA/EIA 568-C.2 Category 6 standard and does not limit 10 Gbps operation at this length.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.