We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short yellow Cat 6 ethernet cable with snagless RJ45 connectors

KEHIPI

KEHIPI Cat 6 network ethernet cable 1ft Yellow 10Gbps 24 AWG

SKU CH-NNA3-53WPF

A 1 ft Cat 6 patch cable with 24 AWG copper conductors and gold-plated RJ45 connectors for 10 Gbps wired links

  • TypeCat 6
  • Cat6
  • Connector ARJ45
  • ColorYellow
  • Features, , , ,
  • Supports 10 Gbps speeds with 24 AWG copper conductors
  • Meets TIA/EIA 568-C.2 Category 6 performance standard
  • Gold-plated RJ45 contacts resist corrosion for lasting signal quality
  • Snagless strain-relief boots protect the connector latch during handling
  • Backwards compatible with existing Cat 5 network installations

run patch cable

This one-foot Cat 6 patch cord uses 24 AWG bare copper conductors and gold-plated RJ45 contacts to deliver 10 Gbps data rates at up to 550 MHz. The snagless strain-relief boots protect the locking tabs during frequent moves in dense rack or desktop environments. Yellow jacket colour simplifies cable identification in multi-segment installations.

Snagless boot and bare copper

Moulded boots prevent tab breakage when cables are pulled through tight cable-management channels, reducing intermittent link faults. Bare copper cores meet TIA/EIA 568-C.2 specifications for insertion loss and crosstalk, ensuring consistent throughput for servers, printers, routers and workstations. Gold-plated contacts resist oxidation in humid or temperature-variable rooms.

Check port spacing and run length

Verify that adjacent RJ45 ports accept the boot width without blocking neighbouring connections, especially on high-density switches. Confirm that a one-foot reach spans the intended device-to-panel or device-to-device distance without tension. Ensure the connected equipment supports 10 Gbps negotiation to utilise the full Category 6 bandwidth.

Highlights

  • Supports 10 Gbps speeds with 24 AWG copper conductors
  • Meets TIA/EIA 568-C.2 Category 6 performance standard
  • Gold-plated RJ45 contacts resist corrosion for lasting signal quality
  • Snagless strain-relief boots protect the connector latch during handling
  • Backwards compatible with existing Cat 5 network installations

Specifications

BrandCable Matters
TypeCat 6
Cat6
Connector ARJ45
ColorYellow
Features, , , ,

Questions about this item

Will the RJ45 gold-plated contacts or snagless boots need replacement after repeated plugging?

The gold-plated contacts and strain-relief boots are built for durability; no scheduled replacement is required under normal use.

At what length does the 550 MHz Cat 6 rating limit 10 Gbps throughput?

The 550 MHz bandwidth supports 10 Gbps up to the standard 55 m Cat 6 channel limit.

Does the 24 AWG bare copper conductor run warm when carrying 10 Gbps continuously?

The 24 AWG bare copper design handles 10 Gbps continuous traffic without noticeable heat rise.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.