KEHIPI
KEHIPI Aluminum Bidirectional HDMI Switch 4K@60Hz 2 in 1 Out 3.9FT Cable
Bidirectional HDMI switch routes two sources to one display or one source between two displays at 4K 60 Hz
- TypeHDMI
- Changer TypeHDMI
- Ports2
- Input Connector2
- Output ConnectorFemale
- Weight0.11 kilograms
- Switch two sources to one screen or one source between two displays with a simple button press
- Supports 4K@60Hz and backward compatible with 2K/1080p for cinema-like 3D visuals
- Aluminium housing delivers stable 3.4Gbps data transmission with reduced signal loss
- Plug-and-play operation requires no external power or drivers for instant setup
- Lightweight 0.11 kg design with 3.9 ft attached cable fits neatly into any entertainment setup
What the KEHIPI switch does
The KEHIPI Aluminum Bidirectional HDMI Switch 4K@60Hz 2 in 1 Out 3.9FT Cable routes HDMI signals in either direction, letting you connect two source devices to one display or one source to two displays. A single button toggles the active path and LED indicators show which port is live. Only one display receives a signal at any time. It suits home-theatre owners who want to share a TV between a console and a streaming stick without swapping cables.
Installation and common issues
Plug the included 3.9FT cable and your own HDMI leads into the three ports; no external power or driver is needed. If 4K@60Hz does not appear, check that every cable in the chain meets the 2.0 standard — 1.4 cables cannot carry the required bandwidth. The total cable run must stay within three metres for reliable 4K. A frequent mistake is expecting both connected monitors to show an image simultaneously; the switch only activates one output at a time.
Practical limits of the HDMI 2.0 path
The switch passes up to 3.4Gbps, which supports 4K at 60Hz and lower resolutions such as 1080p. It does not handle higher refresh rates or wider colour spaces that demand more bandwidth. Audio formats travel alongside video but advanced object-based codecs requiring extra throughput may be truncated. Because the device draws power from the source ports, very long or thin cables can cause voltage drop and signal loss. Buyers needing simultaneous multi-monitor output or bandwidth above 3.4Gbps should look elsewhere.
Highlights
- Switch two sources to one screen or one source between two displays with a simple button press
- Supports 4K@60Hz and backward compatible with 2K/1080p for cinema-like 3D visuals
- Aluminium housing delivers stable 3.4Gbps data transmission with reduced signal loss
- Plug-and-play operation requires no external power or drivers for instant setup
- Lightweight 0.11 kg design with 3.9 ft attached cable fits neatly into any entertainment setup
Specifications
| Brand | KEHIPI |
|---|---|
| Type | HDMI |
| Changer Type | HDMI |
| Ports | 2 |
| Input Connector | 2 |
| Output Connector | Female |
| Weight | 0.11 kilograms |
Questions about this item
How do I confirm the switch is routing the signal correctly after connecting it?
Press the button on the switch; the LED indicator lights up to show which of the two ports is active.
What cables are included and what must I provide?
A 3.9FT HDMI cable is included; you must supply any additional HDMI cables for your source devices and display.
Which HDMI cable version should I use for 4K at 60Hz?
Use an HDMI 2.0 cable and keep the total cable length under 3 metres; HDMI 1.4 cables only support 1080p.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115353BTC
In stock
