We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium boost converter with red, black and yellow wiring, 66 by 60 by 22 mm

KEHIPI

KEHIPI 5V-11V to 12V 5A 60W Waterproof Step-Up Power Adapter

SKU CH-A1CC-Y0NY9

Converts 5 V–11 V input to a regulated 12 V, 5 A output at up to 60 W with over 93 % efficiency in a waterproof, shockproof aluminium enclosure

  • Type5V to 12V 5A
  • ColorSilver
  • Weight0.259 kilograms
  • Converts 5V to 11V input into stable 12V output
  • Delivers up to 60W at 5A continuous current
  • Over 93% conversion efficiency reduces energy loss
  • Waterproof, dustproof and shockproof aluminium housing withstands harsh environments
  • Built-in over-current, overheat and instant high-voltage protection safeguards connected devices

Step-up range and output

This DC boost converter accepts an input voltage between 5 V and 11 V and delivers a fixed 12 V output at up to 5 A. It supplies a maximum of 60 W with a conversion efficiency above 93 %. The unit suits installations that need to raise a lower DC source to a stable 12 V rail.

Rugged build and protection

The aluminium enclosure is waterproof, dustproof, moisture-proof and shockproof, rated for continuous operation from -40 °C to +85 °C. Over-current, overheat and instant high-voltage protection circuits guard the load and the module itself. Input leads are red and black; output leads are yellow and black.

Headroom and limits

Continuous output current is 5 A, so loads drawing less than 60 W at 12 V run with margin. Demands above 5 A or input voltages outside the 5 V to 11 V window will trip protection or shut the converter down. The compact 66 mm by 60 mm by 22 mm body and 13 cm to 14 cm flying leads fit tight enclosures.

Highlights

  • Converts 5V to 11V input into stable 12V output
  • Delivers up to 60W at 5A continuous current
  • Over 93% conversion efficiency reduces energy loss
  • Waterproof, dustproof and shockproof aluminium housing withstands harsh environments
  • Built-in over-current, overheat and instant high-voltage protection safeguards connected devices

Specifications

BrandDROK
Type5V to 12V 5A
ColorSilver
Weight0.259 kilograms

Questions about this item

What mounting space does the 66×60×22 mm aluminium shell need?

The unit measures 66 mm long, 60 mm wide and 22 mm high; allow at least that footprint plus clearance for the 13–14 cm flying leads on both input and output sides.

Which wire colours go to the 5–11 V input and 12 V output terminals?

Connect the red lead to positive and black lead to negative on the 5–11 V source; the yellow lead is positive and the other black lead is negative on the 12 V load side — reversing either pair will damage the converter.

When should the converter be replaced if it runs continuously at 5 A in a 40 °C enclosure?

The aluminium case is rated for –40 °C to +85 °C ambient; sustained 5 A load at elevated temperature will age the internal components faster, so plan on replacement after several years of continuous duty or if the over-temperature protection trips repeatedly.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.