We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular metal power supply with dual output terminals and voltage selector switch

KEHIPI

KEHIPI 5V 10A 50W Dual-Channel Switching Power Adapter

SKU CH-SFCN-3YSYF

Dual-channel 5 V regulated supply delivers up to 10 A per channel with adjustable output and full protection suite

  • Dual 5 V channels power more devices from one unit
  • Adjustable output ±15 % fine-tunes voltage for sensitive loads
  • Four protection circuits guard against over-voltage, over-current, overload and over-temperature
  • Selectable 110 V or 220 V input suits global mains supplies
  • Recommended 80 % load limit (8 A, 40 W) extends service life

Dual-Channel 5 V Power Supply

The KEHIPI regulated switching adapter delivers DC 5 V at up to 10 A from a universal AC 110 V or 220 V input selected by a manual switch. Two independent output channels share the same 50 W total budget, making it suitable for LED strips, CCTV cameras, computer projects and similar low-voltage loads. Professional installation by a qualified electrician is recommended.

50 W Shared Across Two Channels

Each channel can supply a maximum of 10 A and 50 W, but the combined output of both channels is also limited to 10 A and 50 W. The maker advises running devices that draw no more than 8 A or 40 W — roughly 80 % of the rated capacity — to protect the unit’s lifespan. Output voltage is adjustable by ±15 % via a trimmer for fine-tuning.

Indoor-Only Build With Protection Suite

The supply operates indoors only and includes over-voltage, overload, over-current, over-temperature and short-circuit protections. If the over-current switch trips, the unit auto-recovers after about ten minutes with the AC cable removed. No wiring cables, on/off switch, screws or instructions are included; connections are labelled L/N for AC input and +V/-V for DC output.

Highlights

  • Dual 5 V channels power more devices from one unit
  • Adjustable output ±15 % fine-tunes voltage for sensitive loads
  • Four protection circuits guard against over-voltage, over-current, overload and over-temperature
  • Selectable 110 V or 220 V input suits global mains supplies
  • Recommended 80 % load limit (8 A, 40 W) extends service life

Specifications

BrandHenxlco
Part Number062

Questions about this item

Will the dual 5 V 10 A channels run my existing 5 V 8 A LED strips without exceeding the 80 % load guideline?

Each channel can deliver up to 10 A, but the maker advises staying at or below 8 A per channel, so your 8 A strips sit at the recommended limit.

How can I verify the adjustable output is set correctly after wiring the +V and –V terminals?

Turn the yellow trim potentiometer while measuring the output with a multimeter; the voltage can be trimmed ±15 % from 5 V.

Does the unit ship with mounting screws, an on/off switch or wiring cables?

The package contains only the power supply; screws, switch, cables and instructions are not included.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.