We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three small green USB-C PD trigger boards with dial switches

KEHIPI

KEHIPI 3PCS USB-C PD Trigger Board Module 5V 9V 12V 15V 20V power adapter

SKU CH-4X50-Q7KVG

Three USB-C PD trigger modules select 5V, 9V, 12V, 15V or 20V fixed output up to 100W from 4V–22V input

  • Color3 PCS
  • Three modules let you power multiple projects simultaneously
  • Dial switch selects 5V 9V 12V 15V or 20V fixed output
  • USB-C PD 3.0 and QC support enables fast charging from compatible sources
  • Over-temperature and over-voltage protection safeguards connected devices
  • Compact 11 by 25.7 mm board fits tight enclosures

USB-C PD trigger module set

The pack contains three compact boards that request fixed voltages from any USB-C Power Delivery source. Makers, repair technicians and hobbyists can use them to power 5 V, 9 V, 12 V, 15 V or 20 V projects without a dedicated supply. Each module measures 11 × 25.7 mm and fits on a breadboard or inside a small enclosure.

Sustained-load behaviour

Rated for up to 100 W, the modules maintain the selected voltage continuously as long as the attached charger can deliver the current. Over-temperature and over-voltage protection circuits intervene if the source or load exceeds safe limits. The dip-switch configuration remains stable during extended operation, so the output does not drift under load.

Thermals, noise and power draw

No active cooling is present, so the boards run silently and add negligible acoustic noise to a build. Power consumption is limited to the charger’s own overhead plus the protection circuitry. The ABS housing stays cool during typical use because the modules only negotiate voltage and pass current without conversion losses.

Highlights

  • Three modules let you power multiple projects simultaneously
  • Dial switch selects 5V 9V 12V 15V or 20V fixed output
  • USB-C PD 3.0 and QC support enables fast charging from compatible sources
  • Over-temperature and over-voltage protection safeguards connected devices
  • Compact 11 by 25.7 mm board fits tight enclosures

Specifications

BrandAITRIP
Color3 PCS

Questions about this item

How much heat or power draw should I expect when the trigger board runs continuously at 20 V output?

The module supports up to 100 W and includes over-temperature and over-voltage protection, so sustained operation at the selected voltage stays within those limits.

What must I already have to use these trigger boards with a USB-C power source?

You need a USB-C PD charger or power bank that can negotiate 5 V, 9 V, 12 V, 15 V or 20 V, plus a device that accepts the chosen fixed voltage via the board’s output terminals.

Will the board work with an older 5 V-only USB charger that lacks Power Delivery?

The module requires a PD-capable source; it supports PD 3.0/2.0 and BC 1.2, so a legacy 5 V-only charger without PD negotiation will not trigger the higher voltage outputs.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.