We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact grey aluminium box with epoxy potting and connectors

KEHIPI

KEHIPI 36V/48V to 24V 10A 240W Buck Converter power adapter

SKU CH-SX1E-8DNPY

Converts 30 V to 60 V input down to a stable 24 V at 10 A with 95 % efficiency in a compact IP68-rated aluminium case

  • Type48V to 24V 10A
  • ColorGrey
  • Weight264 grams
  • Steps down 36V or 48V to a stable 24V output
  • Delivers up to 10A continuous current for 240W loads
  • Synchronous rectification reaches 95% efficiency with 50mV ripple
  • IP68-rated aluminium housing is waterproof, dust-proof and shock-resistant
  • Smart chip provides over-current, over-load, short-circuit and over-heat protection

36V-48V to 24V 240W Buck Converter

This DC-DC step-down module accepts a nominal 36V or 48V supply with an input range of 30V to 60V and delivers a regulated 24V output at up to 10A. The synchronous rectification design reaches 95% efficiency with 50mV ripple and a 2-second start delay. A compact aluminium housing with epoxy potting provides IP68 waterproof, dust and shock protection across a -40°C to 80°C operating range.

Included Fuse and Connectors Simplify Installation

The package supplies one voltage reducer module with pre-fitted connectors and an integrated fuse, removing the need to source separate protection or wiring terminals. The epoxy-potted construction seals the electronics against moisture and vibration, so the unit can be mounted directly on a golf cart or similar vehicle chassis without an additional enclosure.

Verify Your Source Voltage and Load Before Ordering

Confirm that the source battery or supply stays within the 30V to 60V input window and can provide the required current for a 240W load. Ensure the 24V equipment you intend to power does not exceed the 10A continuous rating. The module is non-isolated, so the input and output share a common ground; this must be acceptable for your wiring layout.

Highlights

  • Steps down 36V or 48V to a stable 24V output
  • Delivers up to 10A continuous current for 240W loads
  • Synchronous rectification reaches 95% efficiency with 50mV ripple
  • IP68-rated aluminium housing is waterproof, dust-proof and shock-resistant
  • Smart chip provides over-current, over-load, short-circuit and over-heat protection

Specifications

BrandHOMELYLIFE
Model48v-24v/10a
Part Number48v-24v/10a
Type48V to 24V 10A
ColorGrey
Weight264 grams

Questions about this item

How often will the internal fuse need replacing on this 240 W buck converter?

The built-in fuse is part of the over-current and short-circuit protection and only operates during a fault; it is not a scheduled maintenance item.

What limits continuous output when the unit runs at 10 A all day?

The converter is rated for 10 A continuous output; sustained operation at that level is limited by the 95 % efficiency and the aluminium shell's ability to dissipate heat within the -40 °C to 80 °C operating range.

How much fan noise or heat should I expect from the IP68 potted module during 24-hour use?

There is no fan — the epoxy-potted aluminium case relies on passive dissipation, so noise is zero and surface temperature rises with load and ambient conditions up to the 80 °C limit.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.