Peerless Industrial Group
Peerless Industrial Group Tire Chains Single Bus & RV V-Bar PK2 QG2821
$67.99
0.00081572BTC
In stock
KEHIPI
KEHIPI 3-72V Automotive Circuit Tester with Voltmeter 140in Wire
Tests 3-72V DC circuits with bidirectional LED polarity indication, 0.1V resolution LCD voltmeter, 140in wire, and illuminated probe tip
- Width6.8 in
- Tests 3-72 V DC circuits on cars, trucks, RVs and boats
- Red and green LEDs show positive or negative polarity instantly
- LCD readout with 0.1 V resolution works in daylight or darkness
- 140 in wire lets you reach distant test points easily
- Stainless probe with anti-lost rubber tip prevents damage and loss
3-72V Automotive Circuit Tester
The KEHIPI circuit tester handles DC voltage from 3 to 72 volts, covering systems that standard 48 or 60 volt lights miss. It suits technicians and owners who diagnose cars, trucks, RVs, boats or motorcycles. A stainless probe pierces insulation for access to tight harnesses.
140 Inch Extended Wire Reach
The 140 inch lead lets the alligator clip reach a battery or chassis ground while the probe works across the vehicle. LCD resolution is 0.1 volt, so readings show tenths rather than whole volts. Backlight and handle illumination keep digits visible in darkness. Bidirectional LEDs show polarity without moving the clip.
Anti-Lost Tip and Acetate Body Check
A rubber guard covers the probe tip when stored, preventing loss and accidental punctures. The body uses acetate fiber for impact resistance. Verify that the circuits under test stay within the 3-72V DC range and that the 6.8 inch overall width fits your tool storage.
Highlights
- Tests 3-72 V DC circuits on cars, trucks, RVs and boats
- Red and green LEDs show positive or negative polarity instantly
- LCD readout with 0.1 V resolution works in daylight or darkness
- 140 in wire lets you reach distant test points easily
- Stainless probe with anti-lost rubber tip prevents damage and loss
Specifications
| Brand | WINAMOO |
|---|---|
| Width | 6.8 in |
Questions about this item
Should I choose the 48V, 60V or 72V version for my vehicle?
This single tester covers the full 3-72V DC range, so one tool handles 48V, 60V and 72V systems without needing separate models.
What does the 3-72V range mean when I am probing a live circuit?
It means the tester will display voltage from 3V up to 72V DC with 0.1V resolution, letting you verify low-voltage signals and higher-voltage circuits on cars, trucks, RVs and boats.
How does the bidirectional alligator clamp affect the voltage reading?
You can clip the clamp to either ground or positive; a red LED shows positive polarity and a green LED shows negative polarity, so the LCD always reflects the correct DC voltage.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
