We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green circuit boards with LCD screens inside a clear plastic case

KEHIPI

KEHIPI 2pcs LCD Boost Converter 6-30V to 7-32V 5A 60W Case

SKU CH-G6FH-RJY1J

Adjustable DC-DC boost converter steps 6–30 V input to 7–32 V output at up to 5 A and 60 W with LCD readout, constant-current/voltage modes and multiple protections in a protective case

  • Weight0.1 lb
  • Adjustable 7–32 V output lets you match diverse loads
  • LCD shows voltage and current together for instant monitoring
  • 5 A peak current with 4 A continuous rating handles demanding projects
  • Up to 96 % conversion efficiency reduces waste heat
  • circuit, over-temperature and reverse-polarity protections guard the circuit

Boost Converter Pair for DIY Power Projects

This pack contains two adjustable DC-DC boost modules that raise an input of 6-30V to an output of 7-32V. Each board delivers up to 5A with a 60W peak rating and includes a built-in LCD that shows voltage and current at the same time. The units ship inside a protective case for bench storage.

Suitable for Hobbyists Needing Adjustable Step

Makers building LED drivers, solar chargers or variable bench supplies will appreciate the constant-current and constant-voltage modes plus the calibration function. The modules only boost voltage, so the output must stay at least 1.5V above the input; buyers who need buck or buck-boost topologies should look elsewhere.

Handles Loads Up to 4A and 50W Comfortably

Continuous operation is recommended within 4A and 50W, with efficiency reaching 96%. Thermal protection shuts the output down if the board exceeds 70°C, and the manual advises extra heat-sinking above 3A or 35W. Large input-to-output differentials reduce the practical power ceiling further.

Highlights

  • Adjustable 7–32 V output lets you match diverse loads
  • LCD shows voltage and current together for instant monitoring
  • 5 A peak current with 4 A continuous rating handles demanding projects
  • Up to 96 % conversion efficiency reduces waste heat
  • circuit, over-temperature and reverse-polarity protections guard the circuit

Specifications

BrandDROK
ModelFBA200572_2x
Part NumberFBA200572_2x
Weight0.1 lb

Questions about this item

What input voltage source do I need to run the KEHIPI boost converter?

You need a DC source between 6V and 30V such as a 12V or 24V battery or power supply that can deliver the required current.

Will the converter work if I keep my existing 12V equipment on the input side?

Yes, a 12V input is within the 6-30V range; the output can be adjusted from 7V to 32V as long as it stays at least 1.5V above the input.

How can I verify the module is regulating correctly after wiring it?

The built-in LCD shows both output voltage and current in real time; compare the displayed values with your target settings to confirm proper operation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.