We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Grey rectangular aluminium block with sealed edges and terminal clamps, 9.8 ounces

KEHIPI

KEHIPI 24V to 12V 20A 240W IP67 power adapter

SKU CH-FBSP-E1D3A

Steps 24 V input down to a regulated 12 V output at up to 20 A and 240 W in an IP67-rated aluminium housing

  • TypeDC 24V*10A(12V-24V)
  • ColorGrey
  • Weight9.8 ounces
  • Converts 24 V input to stable 12 V output at 20 A
  • 95 % conversion efficiency with 50 mV ripple for low heat
  • IP67 aluminium housing resists water, shock, humidity and dust
  • Built-in overload, over-current, over-temperature, short-circuit and over-voltage protection
  • Operates reliably from -40 °C to 80 °C ambient temperature

24 V to 12 V step-down converter

This KEHIPI DC-DC converter steps a nominal 24 V input down to a regulated 12 V output rated at 20 A and 240 W. It suits installers who need reliable 12 V power from a 24 V vehicle or solar system. It is not for buyers who require an isolated topology or a higher output voltage.

IP67 aluminium housing with 95 % efficiency

Synchronised rectification delivers up to 95 % conversion efficiency and a 50 mV ripple figure. The sealed aluminium shell and silicone potting meet IP67 for water, dust, shock and humidity resistance. Operating range spans -40 °C to 80 °C with a two-second start-up delay.

Integrated protections and clamp terminals

On-board smart circuitry provides overload, over-current, over-temperature, short-circuit and over-voltage safeguards. An upgraded fuse and convenient end-clamp connections simplify wiring for golf-cart accessories, LED strips, audio, monitoring gear and similar 12 V loads.

Highlights

  • Converts 24 V input to stable 12 V output at 20 A
  • 95 % conversion efficiency with 50 mV ripple for low heat
  • IP67 aluminium housing resists water, shock, humidity and dust
  • Built-in overload, over-current, over-temperature, short-circuit and over-voltage protection
  • Operates reliably from -40 °C to 80 °C ambient temperature

Specifications

BrandSUPERNIGHT
Model12V-24V
Part Number12V-24V
TypeDC 24V*10A(12V-24V)
ColorGrey
Weight9.8 ounces

Questions about this item

How do I wire the 24 V input and 12 V output leads, and which step is often missed?

Connect the 24 V source to the input terminals observing polarity, then attach the 12 V load to the output terminals; the step often missed is verifying the input fuse is intact before powering up.

What maintenance will the IP67 sealed unit need over time?

No internal servicing is required; periodically check that the aluminium housing and silicone seals remain free of debris and that the end clamps stay tight for continued waterproof performance.

At what point does thermal protection activate during sustained 20 A output?

The over-temperature protection engages when the internal temperature approaches the upper limit of the -40 °C to 80 °C operating range, shutting down the converter until it cools.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.