We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver rectangular switching power supply with three output terminal blocks and voltage selector switch

KEHIPI

KEHIPI 24V 10A 240W Switching Power Adapter

SKU CH-03YC-B7G4K

Converts AC 110V or 220V to adjustable DC 24V with three independent output channels up to 10A total and built-in protection circuits

  • ColorSilver
  • Package Contents0
  • Dual AC 110V/220V input suits worldwide mains voltages
  • Three independent output channels share a 10A 240W total capacity
  • Adjustable ±15% output voltage fine-tunes 24V for sensitive loads
  • Over-voltage, overload, short-circuit and over-current protections safeguard connected equipment
  • Indoor-rated design powers LED strips, CCTV cameras and automation projects

Indoor 24 V 240 W supply

The KEHIPI adapter converts AC 110 V or 220 V mains to a regulated DC 24 V output rated at 10 A and 240 W. It is built for indoor installations such as LED strip lighting, security camera systems and similar low-voltage projects. A selector switch sets the input voltage before use.

Suits single-voltage DC loads up to 8 A

The unit suits devices that draw less than 10 A, with a recommended continuous load of 8 A or 192 W to preserve service life. It is not for outdoor environments, for loads that exceed the 80 % guideline, or for applications that require an integrated power cord, on/off switch or mounting hardware.

Three parallel channels share the 10 A limit

Three independent output terminals let you wire multiple devices from one supply, while the total current remains capped at 10 A. Output voltage is adjustable by ±15 % via a trim potentiometer. Professional wiring is recommended because the enclosure carries high voltage and ships without cables, screws or instructions.

Highlights

  • Dual AC 110V/220V input suits worldwide mains voltages
  • Three independent output channels share a 10A 240W total capacity
  • Adjustable ±15% output voltage fine-tunes 24V for sensitive loads
  • Over-voltage, overload, short-circuit and over-current protections safeguard connected equipment
  • Indoor-rated design powers LED strips, CCTV cameras and automation projects

Specifications

BrandHenxlco
Model054
Part Number054
ColorSilver
Package Contents0

Questions about this item

What input voltage setting must I select on the black switch before connecting to my local mains?

Set the black switch to 110V for North American mains or 220V for other regions; the left position is 110V and the right position is 220V.

Can I run three separate LED strips from the three output channels at the same time?

Yes, the unit has three independent output channels sharing a total limit of 10A 240W, so the combined draw of all strips must stay within that limit.

How do I verify the output voltage is correct after wiring the load?

Use a multimeter on the +V and -V terminals; the reading should be 24V ±15% and you can fine-tune it by turning the yellow button clockwise.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.