KEHIPI
KEHIPI 200W 12V 16.6A IP67 LED Driver Power Adapter 90-130V AC 3.3ft Cable
Waterproof 200W 12V driver with automatic protection and IP67 aluminium housing for outdoor LED strips
- TypeModern
- ColorSilver
- Dimensions8.62 in x 2.71 in x 1.57 in
- Delivers 200 W at 12 V DC 16.6 A for high-power LED installations
- IP67-rated aluminium housing withstands outdoor weather and aids heat dissipation
- Automatic hiccup-mode protection against short circuit, overload, over-voltage, over-current and over-temperature
- Accepts 90-130 V AC input with 88 % efficiency for stable operation
- Compact 8.62 × 2.71 × 1.57 in design includes 3.3 ft cable for flexible placement
Purpose and fit
The KEHIPI 200W LED driver converts 90-130V AC mains to a steady 12V DC output rated at 16.6A. It suits installers who need a single constant-voltage source for LED strips, security cameras, routers or similar 12V loads that stay within the 200W limit. The unit is not dimmable, so it cannot serve projects that require on-board brightness control.
Thermals noise and power
An 88% input efficiency keeps waste heat modest, while the fully encapsulated aluminium housing relies on free-air convection — no fan, no audible noise. The IP67-rated enclosure is specified for continuous operation from -20? to +60? ambient at 20%-90% relative humidity. Protection circuits cover short circuit, overload, over-voltage, over-current and over-temperature using hiccup-mode auto-recovery.
What the accessories change
A fixed 3.3ft input cable with a 3-prong plug is moulded into the housing, so no separate IEC lead is required and the seal remains intact. The 8.62in x 2.71in x 1.57in silver case weighs 2.6lb and mounts flat against a surface. No configuration software, RGB controller or additional wiring harnesses are included in the package.
Highlights
- Delivers 200 W at 12 V DC 16.6 A for high-power LED installations
- IP67-rated aluminium housing withstands outdoor weather and aids heat dissipation
- Automatic hiccup-mode protection against short circuit, overload, over-voltage, over-current and over-temperature
- Accepts 90-130 V AC input with 88 % efficiency for stable operation
- Compact 8.62 × 2.71 × 1.57 in design includes 3.3 ft cable for flexible placement
Specifications
| Brand | NIYIPXL |
|---|---|
| Model | PFH |
| Type | Modern |
| Color | Silver |
| Dimensions | 8.62 in x 2.71 in x 1.57 in |
Questions about this item
How do I mount the 8.62 in x 2.71 in x 1.57 in aluminum housing and where does the 3.3 ft cable reach?
Mount the driver on a flat surface using the housing screw holes; the 3.3 ft input cable with 3-prong plug connects to a 90-130V AC outlet, while the output wires run to your 12V DC load, keeping total draw at or below 200W.
What upkeep does the sealed IP67 unit need over time?
No internal maintenance is required; periodically wipe the aluminum case to keep airflow clear, verify the cable jacket and connectors stay intact, and confirm the 88% efficiency rating by checking that the housing temperature stays within the -20 to +60°C range.
At what point does the 200W limit trigger protection during continuous operation?
When the connected load exceeds 200W or 16.6A, the hiccup-mode circuit cuts output and auto-recovers once the overload is removed; sustained operation at full load is rated up to 60°C ambient.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115353BTC
In stock
