We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear plastic RJ45 pass-through connectors in a bulk jar, 200 pieces

KEHIPI

KEHIPI 200-Pack Cat 6 Pass Through RJ45 Connectors 50µ Gold Plated

SKU CH-FQBT-74KTG

A 200-pack of Cat 6 pass-through RJ45 connectors with 50µ gold-plated contacts for solid or stranded UTP cable up to 6.1mm diameter

  • TypeEthernet
  • Cat6
  • Connector ARJ45
  • Colortransparent
  • Features, , , ,
  • Build custom Ethernet cables easily with pass-through design for solid or stranded UTP
  • Three-point staggered contacts give secure gigabit connections up to 10 GbE speeds
  • 50µ gold-plated contacts resist corrosion for long-lasting conductivity
  • 200 connectors in a screw-top jar keep large projects organised
  • Works with 23–24 AWG wire and cable up to 6.1 mm outside diameter

200-Pack Cat 6 Pass Through Connectors

This 200-pack of Cat 6 pass through RJ45 connectors supplies enough ends for large cabling projects or multiple installations. Each connector accepts solid or stranded UTP cable with 23 to 24 AWG conductors and an outside diameter up to 6.1 mm. The transparent bodies let you verify wire order before crimping. A screw-top jar keeps the batch organised on site.

Installers needing fast, verified terminations

The pass through design lets wires feed completely through the plug so you can confirm the sequence before crimping, saving time on big jobs. Three-point staggered contacts give a secure connection rated for 10 Gigabit Ethernet. Buyers who need shielded plugs for noisy environments or connectors rated for cable larger than 6.1 mm outside diameter should look elsewhere.

50µ gold contacts for 10 Gigabit Ethernet

Fifty-micron gold plating on the contacts provides superior conductivity and corrosion resistance for long-term performance at 10 Gigabit speeds. The connectors are backward compatible with Cat 5e cabling and work with standard RJ45 crimp tools. This specification determines whether the plug meets the signal integrity your installation requires.

Highlights

  • Build custom Ethernet cables easily with pass-through design for solid or stranded UTP
  • Three-point staggered contacts give secure gigabit connections up to 10 GbE speeds
  • 50µ gold-plated contacts resist corrosion for long-lasting conductivity
  • 200 connectors in a screw-top jar keep large projects organised
  • Works with 23–24 AWG wire and cable up to 6.1 mm outside diameter

Specifications

BrandCable Matters
TypeEthernet
Cat6
Connector ARJ45
Colortransparent
Features, , , ,

Questions about this item

What cable type and wire gauge must I already have to terminate with these pass-through plugs?

They accept solid or stranded UTP cable with 23 to 24 AWG conductors, insulated diameter 0.97 to 1.07 mm, and an outer jacket up to 6.1 mm.

Will these connectors still perform if I mix them with existing Cat 5e patch cords in the same run?

Yes, the Cat 6 plugs are backward compatible with Cat 5e cables and maintain gigabit speeds across the mixed link.

How can I verify each crimped connector is wired correctly after assembly?

Feed the wires through the transparent pass-through body, confirm the colour order before crimping, then test continuity and pin-out with a cable tester.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.