We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two small USB-C trigger modules with male connectors and button controls

KEHIPI

KEHIPI 2-pack USB-C PD/QC trigger module 100W 5A adjustable 5V 9V 12V 15V 20V power adapter

SKU CH-Z6K9-94MPP

Two USB-C trigger modules negotiate 5 V, 9 V, 12 V, 15 V or 20 V at up to 100 W from PD and QC chargers

  • ColorType-C Male Plate Output
  • Two-module pack simplifies multi-device testing
  • Adjustable 5V, 9V, 12V, 15V, 20V output matches diverse loads
  • Button lock prevents accidental voltage changes
  • LED shows active voltage at a glance
  • Supports PD 2.0, PD 3.0, QC 2.0, QC 3.0, AFC protocols

Two-pack trigger modules for USB-C power negotiation

The KEHIPI set contains two Type-C male trigger modules that negotiate voltage with a PD or QC power source. Each module requests 5 V, 9 V, 12 V, 15 V or 20 V at up to 5 A, allowing a single charger to feed multiple low-voltage projects or test fixtures. The button-lock function prevents accidental voltage changes that could damage connected loads.

Sustained 100 W output with automatic recovery

Rated for 20 V at 5 A, the modules maintain the negotiated voltage continuously as long as the source can supply it. Onboard polling modes can cycle to the highest available voltage or return to 5 V automatically, and the last setting is restored after a power loss. The housing is specified to withstand voltages above 30 V during extended ageing tests.

Verify charger capability and connector fit

Confirm that your USB-C power supply advertises the desired PD or QC voltage steps before ordering. The modules draw power directly from the Type-C port, so cable length and source current limit determine the real-world output. No additional drivers or software configuration are required.

Highlights

  • Two-module pack simplifies multi-device testing
  • Adjustable 5V, 9V, 12V, 15V, 20V output matches diverse loads
  • Button lock prevents accidental voltage changes
  • LED shows active voltage at a glance
  • Supports PD 2.0, PD 3.0, QC 2.0, QC 3.0, AFC protocols

Specifications

BrandAITRIP
ColorType-C Male Plate Output

Questions about this item

Does the module generate noticeable heat or noise when supplying 100W continuously?

The module has no moving parts and draws ultra low power itself, so it runs silently; any warmth comes from the upstream charger delivering up to 20V at 5A.

What must I already own to use this trigger with my 12V or 15V device?

You need a USB-C charger or power bank that supports PD2.0, PD3.0, QC2.0, QC3.0 or AFC and can provide the voltage your device requires.

Will this 2-pack work with an older QC2.0-only power bank to trigger 9V or 12V output?

Yes, the module supports QC2.0 and QC3.0 decoy modes, so it can negotiate 9V or 12V from a legacy Quick Charge source.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.