We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two small green circuit boards with USB-C ports and buttons

KEHIPI

KEHIPI 2-Pack USB-C PD QC Adjustable Voltage Trigger Module 5A Type-C Female USB Port Input

SKU CH-575V-59D23

Adjustable USB-C trigger module delivers selectable 5 V, 9 V, 12 V, 15 V or 20 V at up to 5 A for fast-charge testing

  • ColorType-C Female USB Output
  • Supports PD 3.0, PD 2.0, QC, FCP, AFC protocols
  • Adjustable 5V, 9V, 12V, 15V, 20V output voltages
  • Button lock prevents accidental voltage changes
  • Handles up to 100W at 5A maximum current
  • Two modules included for testing or backup

Two-module trigger kit

This two-pack provides USB-C trigger modules that negotiate adjustable voltage from a PD or QC source. Each board accepts a Type-C female input and can be configured to output 5 V, 9 V, 12 V, 15 V or 20 V for prototyping, testing or powering small loads. The pair is aimed at engineers, hobbyists and repair technicians who need repeatable voltage selection without a bench supply.

Button-locked PD and QC decoy

The modules support PD 2.0, PD 3.0, QC, FCP and AFC protocols with a mode switch that can restrict operation to PD only. A button lock prevents accidental voltage changes that could damage connected equipment. LED indicators show the active output level, and the last setting is restored on power-up. Maximum rated output is 100 W at 5 A, with a 20 V 5 A ceiling dependent on the source capability.

Check source capability and wiring

Verify that your USB-C power supply can deliver the desired voltage and current combination before connecting a load. The boards require a Type-C male plug on the supply side and expose a Type-C female port for the output. No cables are included, so confirm you have suitable leads. The hardware tolerates input above 30 V for ageing tests, but normal operation stays within the negotiated PD range.

Highlights

  • Supports PD 3.0, PD 2.0, QC, FCP, AFC protocols
  • Adjustable 5V, 9V, 12V, 15V, 20V output voltages
  • Button lock prevents accidental voltage changes
  • Handles up to 100W at 5A maximum current
  • Two modules included for testing or backup

Specifications

BrandAITRIP
ColorType-C Female USB Output

Questions about this item

Which charging protocols does the USB-C trigger module support and what is the maximum power output?

The module supports PD 3.0, PD 2.0, QC, FCP and AFC protocols with a maximum output of 100W at 5A, allowing voltage selection of 5V, 9V, 12V, 15V or 20V depending on the connected power supply.

What physical port and form factor does this trigger board use for input and output?

It features a USB-C female input port with integrated molding for durability and provides a USB-A female output port for connecting the load device.

How is the output voltage configured and which step is commonly missed during setup?

Press the button to cycle through 5V, 9V, 12V, 15V and 20V settings; the LED indicates the active voltage. The step often missed is enabling the button lock after selection to prevent accidental voltage changes that could damage connected equipment.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.