We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium box with sealed silicone edges

KEHIPI

KEHIPI 12V to 48V Boost Converter 288W 6A IP68

SKU CH-FN82-A3NQ1

A 12 V to 48 V boost converter delivering 288 W at 6 A with 97 % efficiency and IP68 sealing

  • ColorSilver
  • Weight0.66 lb
  • Steps up 12 V to 48 V at 288 W for high-power loads
  • 97 % conversion efficiency cuts heat and saves battery capacity
  • IP68 rating withstands dust and water in harsh environments
  • SMT build on FR-4 board delivers stable output under vibration
  • Built-in protections guard against over-voltage, overload and short circuits

12V to 48V Boost Converter 288W

The KEHIPI boost converter steps a 12V source up to a regulated 48V output at up to 6A continuous current. It is built for golf carts, RV installations, solar arrays, LED lighting runs and similar 48V loads that must run from a 12V battery bank.

IP68 Sealed 97% Efficient Operation

Synchronous rectification keeps conversion efficiency at 97%, so waste heat stays low even at the full 288W rating. The aluminium housing is silicone sealed to IP68, allowing the unit to run silently without forced airflow in wet, dusty or vibration heavy environments.

Aluminium Shell SMT Construction

A multilayer FR-4 board populated entirely with surface mount components sits inside the rugged silver aluminium shell. Integrated protection logic guards against input under voltage over voltage overload over temperature and output short circuit. The sealed enclosure and compact 0.66 lb form factor suit permanent mounting on vehicle frames or inside equipment cabinets.

Highlights

  • Steps up 12 V to 48 V at 288 W for high-power loads
  • 97 % conversion efficiency cuts heat and saves battery capacity
  • IP68 rating withstands dust and water in harsh environments
  • SMT build on FR-4 board delivers stable output under vibration
  • Built-in protections guard against over-voltage, overload and short circuits

Specifications

BrandEAGWELL
Model11-16V to 48V 6A
Part NumberI1600-AM
ColorSilver
Weight0.66 lb

Questions about this item

How do I wire the 11V-16V input and 48V output on this IP68 boost converter, and what step do people miss?

Connect the 12V source to the input terminals observing polarity, then attach the 48V load to the output terminals; the step often missed is confirming the source stays within 11V-16V under load so the converter never sees an under-voltage condition.

What maintenance or replacement will the aluminium-cased, silicone-sealed 288W unit need later?

No scheduled maintenance is required; the sealed IP68 enclosure protects the SMT components, so only inspect wiring and mounting hardware periodically and replace the whole unit if the over-voltage, under-voltage, overload, over-temperature or short-circuit protection triggers repeatedly.

What limit appears first when the 6A 97%-efficient converter runs continuously at full load?

The 6A output-current limit is reached first; at 48V this equals the 288W rating, and the built-in overload protection will shut the unit down before thermal limits are exceeded.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.