We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver metal power supply unit with ventilation holes

KEHIPI

KEHIPI 12V 50A 600W Power Adapter

SKU CH-8EWN-4NHBV

Converts AC 90-120V to adjustable DC 5V at 50A 600W with short circuit, overload and overvoltage protection for LED strips, CCTV and 3D printers

  • Type12V50A 600W
  • ColorSilver
  • Package Contents1
  • Converts AC 90-120V to stable DC 5V power
  • Adjustable output voltage within 10% range for precision
  • Multiple protections include short circuit, overload and overvoltage
  • Silver metal shell with porous heat dissipation design
  • Supports WS2811, WS2812B, WS2815 and SK6812 LED strips

Compact 600 W switching adapter

This KEHIPI unit converts AC 90-120 V input into a stable DC 5 V output rated at 50 A and 600 W. It is aimed at makers, integrators and technicians who need a single high-current source for LED pixel strips, CCTV arrays, 3D printers or similar low-voltage projects. The adjustable 10 % trim lets installers compensate for cable drop without extra regulators. Builders needing multiple isolated rails or higher output voltages should look elsewhere.

Passive silver enclosure

A perforated metal shell provides porous heat dissipation that keeps internal temperatures within a safe range during continuous operation. No internal fan is mentioned, so acoustic output remains negligible in typical indoor deployments. Protection circuits cover short circuit, overload and overvoltage events at 11.5 %-135 % thresholds, with automatic reset or fuse action restoring operation after a fault clears. An external 110/240 V selector switch must be set correctly before powering the unit.

Single-unit package with wide LED protocol support

The box contains one power supply and no additional cables, mounting brackets or configuration software. Compatibility is explicitly listed for WS2811, WS2801, WS2812B, WS2815, 1903, WS2813, SK9822, APA102, SK6812RGB, SK6812RGBW and SP602E addressable strips, simplifying procurement for lighting installers. Users requiring pre-wired connectors, remote dimming interfaces or enclosed waterproof housings will need to source those separately.

Highlights

  • Converts AC 90-120V to stable DC 5V power
  • Adjustable output voltage within 10% range for precision
  • Multiple protections include short circuit, overload and overvoltage
  • Silver metal shell with porous heat dissipation design
  • Supports WS2811, WS2812B, WS2815 and SK6812 LED strips

Specifications

BrandPHEVOS
Part NumberPL-POWER SUPPLY
Type12V50A 600W
ColorSilver
Package Contents1

Questions about this item

How do I wire the AC 110/240 V selector switch before connecting the 12 V 50 A output?

Set the switch to 110 V for 90-120 V mains or 240 V for higher mains before powering on; the supply then delivers adjustable 12 V up to 50 A with automatic reset protection.

What part will need attention first during continuous 600 W operation?

The internal fuse linked to the 11.5 %-135 % over-voltage circuit is the first replaceable item if repeated cut-outs occur under sustained load.

At what point does the 12 V 50 A unit shut down during prolonged full-load use?

Overload protection triggers at 135 % of rated current, cutting output until the automatic reset cycles or the fuse opens.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.