We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver rectangular aluminium power supply 215 x 114 x 50 mm with voltage selector switch and screw terminals

KEHIPI

KEHIPI 12V 30A 360W Switching Power Supply Silver

SKU CH-DNPT-3V83J

Converts 110V or 220V AC to 12V DC at up to 30A with short-circuit, overload and over-voltage protection for indoor CCTV, LED strips and 3D printers

  • ColorSliver
  • Dimensions5.0 in x 4.5 in x 2.0 in
  • Weight0.25 lb
  • Delivers 360 W for demanding LED strips and 3D printers
  • Dual 110 V / 220 V input switch suits global mains
  • Built-in short-circuit, overload and over-voltage protection safeguards connected gear
  • Adjustable output within 10 % fine-tunes voltage for sensitive projects
  • Compact aluminium chassis at 215 × 114 × 50 mm fits tight enclosures

Universal 12 V 30 A switching supply

This 360 W unit converts AC 110 V or 220 V to a regulated 12 V DC output rated at 30 A. A built-in selector switch sets the input voltage before power is applied. It suits CCTV installations, radio equipment, computer projects, LED strip lighting and 3D printers. Indoor use only because the enclosure is not waterproof.

Wiring and protection features

Screw terminals accept live and neutral on the input side and provide COM, V and +V/ADJ on the output side. The +V/ADJ terminal allows a 10 % voltage adjustment. Integrated protection covers shortage, overload and over-voltage at 115 % to 135 % with auto-reset or fuse reset. An aluminum shell aids heat dissipation without a fan.

Output capacity and limits

Continuous output reaches 29.2 A at 12 V, delivering the full 360 W within the stated protection window. The unit measures 215 mm by 114 mm by 50 mm and weighs 660 g. It is not suitable for outdoor or wet environments and cannot supply voltages other than the adjustable 12 V range.

Highlights

  • Delivers 360 W for demanding LED strips and 3D printers
  • Dual 110 V / 220 V input switch suits global mains
  • Built-in short-circuit, overload and over-voltage protection safeguards connected gear
  • Adjustable output within 10 % fine-tunes voltage for sensitive projects
  • Compact aluminium chassis at 215 × 114 × 50 mm fits tight enclosures

Specifications

BrandBMOUO
ModelAMZ0005-A
Part NumberAMZ0005-A
ColorSliver
Dimensions5.0 in x 4.5 in x 2.0 in
Weight0.25 lb

Questions about this item

How much current can the 12 V rail deliver continuously before the overload protection trips?

The unit is rated for up to 29.2 A continuous output; the overload protection activates above that level and auto-resets once the load drops back within spec.

Does the built-in fan stay quiet when the supply runs at full load for hours?

No fan is mentioned in the specifications; cooling relies on the aluminium chassis, so there is no fan noise at any load.

What AC plug or cable must I already have to connect this supply to the mains?

The input terminals are labelled L and N for live and neutral; you need a suitable three-wire AC cord with an IEC or hard-wired connection rated for 115 V or 230 V.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.