We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Grey rectangular aluminium module with epoxy potting, compact waterproof DC-DC step-down converter

KEHIPI

KEHIPI 12V/24V to 5V 20A 100W waterproof power adapter

SKU CH-95R7-PG6SP

Converts 12V or 24V DC input to a stable 5V 20A 100W output with 95% efficiency in an IP68 waterproof aluminium housing

  • Type12V/24V to 5V 20A
  • Colorgrey
  • Weight250 grams
  • Converts 12 V or 24 V input to stable 5 V 20 A output
  • 95 % conversion efficiency with 50 mV ripple
  • Over-current, over-load, short-circuit and over-heat protection built in
  • IP68-rated aluminium housing, epoxy-potted for water, dust and shock resistance
  • Operates reliably from -40 °C to 80 °C

Voltage Converter for 12V and 24V Systems

The KEHIPI adapter steps down a nominal 12V or 24V DC input to a stable 5V 20A output rated at 100W. It uses synchronous rectification to reach up to 95% efficiency with a ripple wave of 50Mv and a starting delay of 2S. The unit is housed in a compact aluminium shell with epoxy potting that provides IP68 waterproof, anti-dust and anti-shock protection while aiding heat dissipation.

Suits Vehicles and Gear Needing Regulated 5V Power

Golf carts, club cars and similar 12V or 24V platforms that require clean 5V DC for accessories will benefit from the built-in intelligent protections against over-current, over-load, low-load, short-circuit and over-heat. The non-isolated design and 10A maximum input current mean it is not intended for isolated medical or industrial safety circuits, nor for loads that exceed the 20A output rating.

Verify Your Source Voltage and Wiring Before Fitting

Confirm the supply is a nominal 12V or 24V DC source capable of delivering up to 10A input current. Ensure the operating environment stays within the -40°C to 80°C range and that the 250g module can be mounted where its aluminium case has airflow for heat dissipation. Check that the load does not surpass 20A at 5V and that the IP68 rating matches the intended exposure to moisture or dust.

Highlights

  • Converts 12 V or 24 V input to stable 5 V 20 A output
  • 95 % conversion efficiency with 50 mV ripple
  • Over-current, over-load, short-circuit and over-heat protection built in
  • IP68-rated aluminium housing, epoxy-potted for water, dust and shock resistance
  • Operates reliably from -40 °C to 80 °C

Specifications

BrandHOMELYLIFE
Model12V/24V-5V 10A
Part Number12V/24V-5V 10A
Type12V/24V to 5V 20A
Colorgrey
Weight250 grams

Questions about this item

What input voltage source do I need to connect to the 12V/24V terminals for this converter to operate?

Connect a 12V or 24V DC supply rated for at least 10A to the input terminals; the module accepts either nominal voltage and draws up to 10A at full load.

If I keep my existing 12V battery wiring, will the 5V 20A output share a common ground with the input?

This is a non-isolated buck module, so the input negative and output negative are internally connected; the 5V output references the same ground as your 12V or 24V source.

How can I confirm the converter is regulating correctly once installed?

Measure the output with a multimeter under load; a steady 5V ±2% reading and the absence of protection shutdown after the 2S start delay indicate normal operation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.