KEHIPI
KEHIPI 12V 15A 180W Dual-Channel Switching Power Adapter
Dual-channel 12V supply delivers up to 15A per output with adjustable voltage and full protection suite
- ColorBlack
- Dimensions8.2 in x 4.0 in x 1.9 in
- Dual 110V/220V input suits global mains supplies
- Two independent 12V 15A channels power multiple devices
- Adjustable ±15% output voltage matches varied load requirements
- Four protection circuits guard against voltage, current and heat faults
- Indoor-rated metal enclosure measures 8.2 in x 4.0 in x 1.9 in
Indoor 12 V 15 A switching supply
The KEHIPI unit converts AC 110 V or 220 V mains to a regulated DC 12 V output rated at 15 A and 180 W. It is built for indoor installations such as LED strip lighting, CCTV camera systems and similar low-voltage projects. A front-mounted selector sets the input voltage and a yellow trimmer adjusts the output by ±15 %. Professional wiring is recommended because no cord, switch or mounting hardware is supplied.
Dual independent output channels
Two separate terminal pairs let you feed different loads from one enclosure, each capable of the full 15 A 180 W rating. The combined draw across both channels is limited to 15 A 120 W, so the total power budget drops when both outputs are used. The supplier advises keeping continuous load at or below 80 % of the single-channel maximum, roughly 12 A 144 W, to protect component lifespan.
Protection limits and indoor-only constraint
Over-voltage, over-current, overload, over-temperature and short-circuit circuits shut the supply down if limits are exceeded; the over-current latch self-resets after about 10 minutes with the AC cord removed. The aluminium case measures 8.2 in by 4.0 in by 1.9 in and is rated for indoor use only, so outdoor or damp environments are excluded. No efficiency, power-factor or ripple figures are provided.
Highlights
- Dual 110V/220V input suits global mains supplies
- Two independent 12V 15A channels power multiple devices
- Adjustable ±15% output voltage matches varied load requirements
- Four protection circuits guard against voltage, current and heat faults
- Indoor-rated metal enclosure measures 8.2 in x 4.0 in x 1.9 in
Specifications
| Brand | Henxlco |
|---|---|
| Model | 15 |
| Part Number | 15 |
| Color | Black |
| Dimensions | 8.2 in x 4.0 in x 1.9 in |
Questions about this item
What are the physical dimensions of the KEHIPI 12V 15A 180W power adapter?
The unit measures 8.2 in long, 4.0 in wide and 1.9 in high. It has two independent output channels and a black metal case designed for indoor mounting.
How do I set the input voltage correctly before installing the adapter?
Use the black selector switch on the side: left position for AC 110V (USA/CA), right position for AC 220V. Set this before plugging in the mains cable.
What routine maintenance does the manufacturer recommend for this power supply?
Dust the interior every 2 or 3 months. If the overcurrent protection trips, unplug the AC cord, wait about 10 minutes for auto-recovery, then reconnect.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00113914BTC
In stock
