We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Slim pen-shaped voltage tester with white body and red tip, 6.2 inches long

KEHIPI

KEHIPI 12-1000V Adjustable Sensitivity Voltage Tester Pen

SKU CH-CNCD-6KYPA

Detects AC voltage from 12 to 1000 volts with adjustable sensitivity and CAT III 1000V safety rating

  • Width6.2 in
  • Adjustable 12-1000V range detects both standard and low-voltage AC circuits
  • Dual sensitivity modes (48-1000V default, 12-1000V high) for flexible, precise measurements
  • Non-contact detection identifies live and neutral wires via buzzer speed and green/red indicator lamp
  • Wire breakpoint finder function locates cable faults quickly in high-sensitivity mode
  • CE CAT III 1000V / CAT IV 600V rating with red LED alert above 90V for safety

What this tester does and who uses it

The KEHIPI voltage tester pen detects AC voltage from 12 V to 1000 V. It suits DIY users, hobbyists and homeowners who need a first safety check before touching wiring. The tool also finds wire break points and distinguishes live from neutral conductors without contact.

Practical limits of the CAT ratings

The tester meets CE CAT. III 1000 V and CAT. IV 600 V standards. Above 90 V the indicator lamp turns red as a high-voltage alert. The device is not suitable for DC-powered lighting such as Christmas lights.

Check your setup before ordering

Ensure the circuits you test are AC within the 12 V to 1000 V range. Verify you need non-contact detection with audible and visual alarms. The pen is 6.2 in long, so confirm it reaches your test points.

Highlights

  • Adjustable 12-1000V range detects both standard and low-voltage AC circuits
  • Dual sensitivity modes (48-1000V default, 12-1000V high) for flexible, precise measurements
  • Non-contact detection identifies live and neutral wires via buzzer speed and green/red indicator lamp
  • Wire breakpoint finder function locates cable faults quickly in high-sensitivity mode
  • CE CAT III 1000V / CAT IV 600V rating with red LED alert above 90V for safety

Specifications

BrandNeoteck
Width6.2 in

Questions about this item

Should I use the 12 V or 48 V starting range for household wiring?

Press the S button to select 12-1000 V high sensitivity for detailed work on low-voltage circuits, or leave it in the default 48-1000 V mode for standard mains checks.

What does the red lamp and fast buzzer tell me when I hold the tip near a cable?

Red lamp and rapid beeping mean the conductor is live; green lamp and slow beeping identify the neutral wire.

What does the CAT III 1000 V and CAT IV 600 V rating limit in daily use?

The tester is rated for measurements up to 1000 V on fixed building wiring and 600 V at the service entrance, covering typical residential and light-commercial circuits.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.