We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular silver metal power supply with built-in cables and battery clips, cooling vents and voltage selector switch

KEHIPI

KEHIPI 110V/220V to 12V DC Converter 600W 50A Power Adapter

SKU CH-3W0C-435G5

Converts 110V or 220V AC to 12V DC at up to 50A with selectable input, tool-free clips and five protection circuits

  • Type600W AC TO DC CONVERTER
  • ColorAC to DC Converter 12V
  • Dimensions4.52 in x 8.54 in x 1.96 in
  • Weight2.6 lb
  • Package Contents12V Power Supply,Power Cord,Wire Lugs,Metal Clip,Screws
  • Universal 110V/220V input works worldwide
  • 600 W peak power handles heavy loads
  • Tool-free clips connect in seconds
  • Five-way protection guards sensitive gear
  • Smart fan runs only under load

Universal Voltage Power Adapter

The KEHIPI AC to DC converter delivers 12 V at up to 50 A with a 600 W peak rating. It auto-ranges between 110 V and 220 V input for worldwide use. The unit is built for RV appliances, LED strips, CCTV systems, pumps and car stereos that need clean DC power.

Continuous Load Limits

Run resistive loads such as LEDs up to 480 W continuous; motor-driven devices need the 600 W peak to handle start-up surges. The input selector switch must be set to 110 V (85–140 V) or 220 V (185–265 V) before powering on. Output voltage stays at 12 V ±0.5 % under load.

Tool-Free Installation

Built-in cables with battery clips let you connect a 12 V device in seconds without tools. The aluminium chassis acts as a heatsink and the fan runs only under heavy load for quiet operation. Do not use this supply for battery charging or PWM motor control. Mounting holes accept 2.5 mm screws.

Highlights

  • Universal 110V/220V input works worldwide
  • 600 W peak power handles heavy loads
  • Tool-free clips connect in seconds
  • Five-way protection guards sensitive gear
  • Smart fan runs only under load

Specifications

BrandEAGWELL
ModelAC TO DC CONVERTER
Part NumberI1618
Type600W AC TO DC CONVERTER
ColorAC to DC Converter 12V
Dimensions4.52 in x 8.54 in x 1.96 in
Weight2.6 lb
Package Contents12V Power Supply,Power Cord,Wire Lugs,Metal Clip,Screws

Questions about this item

Should I run my load at the full 50 A rating or stay lower?

The supplier recommends continuous use below 40 A (480 W). For resistive loads such as LED strips, size the converter at 1.25 times the device power; for motor-driven loads, allow at least 2 times the motor rating.

What does the 600 W peak figure mean once the unit is installed in my system?

600 W is the absolute maximum output for short bursts; sustained operation should stay at or under 480 W to avoid shortening the converter's lifespan.

How does the 110 V / 220 V input switch affect what I can plug in?

You must set the selector to 110 V for North American mains (85–140 V) or 220 V for European and Australian mains (185–265 V) before powering the unit; the wrong setting can damage the converter.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.