We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten bare circuit boards with USB-C ports, green solder mask, standard board finish

KEHIPI

KEHIPI 10PCS PD65W USB-C Charging Module Standard Board

SKU CH-3NKW-J4SC4

Ten USB-C charging modules deliver up to 65W with PD3.1, QC3.0, SCP and PPS support from an 8-32V DC input

  • ColorStandard Board 10PCS
  • Output Volt21 volts
  • Support Volt20 volts
  • Delivers up to 65W via USB-C for rapid laptop charging
  • Supports PD3.1, QC3.0, SCP and PPS protocols for broad device compatibility
  • Achieves 92%–97% conversion efficiency reducing heat and energy waste
  • Includes comprehensive protection: over-current, short-circuit, over-temperature and input voltage safeguards
  • Pack of 10 modules with Type-C interface for multi-project deployment

PD65W USB-C Charging Module Pack

This pack contains ten identical PD65W charging modules with a Type-C interface. Each board accepts a DC input between 8 V and 32 V and automatically negotiates an output voltage from 3.3 V to 21 V with compatible devices. The modules support PD3.1 (PPS), QC3.0 and SCP fast-charging protocols for phones, tablets and laptops. They are aimed at engineers and hobbyists building custom power supplies or multi-port chargers.

Thermals Noise and Power Draw

Conversion efficiency ranges from 92 % to 97 % under typical loads, keeping heat rise low during normal operation. Built-in protections include input over-voltage, under-voltage and over-current safeguards plus output over-current, short-circuit and whole-device over-temperature shutdown. At a 24 V input powering a laptop at roughly 50 % battery the board delivers the full 65 W without audible noise. Ripple remains controlled at no-load conditions.

Sustained Load Behaviour

Under continuous 65 W demand the module maintains a stable 20 V 3.25 A output as long as the source voltage stays above 20 V. Over-temperature protection will throttle or shut down the board if the enclosure cannot dissipate the residual heat. The 92 %–97 % efficiency band holds across the load range, so sustained thermal performance depends mainly on the installer’s heatsinking. No active cooling is included on the bare board.

Highlights

  • Delivers up to 65W via USB-C for rapid laptop charging
  • Supports PD3.1, QC3.0, SCP and PPS protocols for broad device compatibility
  • Achieves 92%–97% conversion efficiency reducing heat and energy waste
  • Includes comprehensive protection: over-current, short-circuit, over-temperature and input voltage safeguards
  • Pack of 10 modules with Type-C interface for multi-project deployment

Specifications

BrandAITRIP
ColorStandard Board 10PCS
Output Volt21 volts
Support Volt20 volts

Questions about this item

How do I install the KEHIPI PD65W charging module and what wiring mistake should I avoid?

Supply DC 8–32 V to the input terminals, ensuring the input voltage exceeds the desired output; for 20 V fast charging the input must be above 20 V, then connect the Type-C port to the device.

What maintenance or replacement will the module need over time?

The module has no user-serviceable parts; if the over-temperature, over-current or short-circuit protection activates repeatedly, replace the affected board.

What limit appears first during sustained 65 W operation?

The over-temperature protection triggers first when the board temperature rises under continuous full-load use.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.