We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black stereo speaker selector box with A B A+B switch and screw terminals

Keen Eye KETTA-1001 2-Way Stereo Speaker Selector Switch

SKU CH-DCM8-H5R3Q

Two-way stereo speaker selector lets you choose set A, set B, or both combined with screw-down terminals

  • TypeRCA
  • Changer TypeRCA
  • ColorBlack
  • Ports2
  • Input Connector2
  • Weight0.141 kilograms
  • Select Speaker A, B or A+B for flexible listening
  • 2-way stereo switch box with mounting screws included
  • Limited to 10 watts per channel continuous power
  • Screw-down terminals ensure secure speaker connections
  • Lightweight at 0.141 kilograms for easy placement

2-Way Stereo Speaker Selector

The Keen Eye KETTA-1001 routes a single audio source to speaker set A, set B, or both sets simultaneously. It is designed for listeners who want to send sound to a second zone without installing a separate amplifier. The unit uses screw-down terminals for secure bare-wire connections and includes mounting screws for a fixed installation. Black metal housing keeps the switch discreet on a shelf or wall.

Continuous Power Limit Under Sustained Load

The selector is rated for 10 watts per channel of continuous music power, so it handles background listening and moderate volumes without issue. Driving both speaker pairs together at high levels for long periods can exceed this limit and cause the switch to overheat or the amplifier to see an unsafe impedance. Users who need room-filling volume across two zones should consider a dedicated multi-zone amplifier instead.

10 Watt Per Channel Rating

This power figure is the single specification that decides whether the KETTA-1001 matches your system. If your amplifier delivers more than 10 watts per channel continuously into the connected speakers, the switch becomes the bottleneck and a potential failure point. Buyers who need higher continuous power handling cannot use this selector safely.

Highlights

  • Select Speaker A, B or A+B for flexible listening
  • 2-way stereo switch box with mounting screws included
  • Limited to 10 watts per channel continuous power
  • Screw-down terminals ensure secure speaker connections
  • Lightweight at 0.141 kilograms for easy placement

Specifications

BrandKeen Eye
ModelKETTA-1001
Part NumberKETTA-1001
TypeRCA
Changer TypeRCA
ColorBlack
Ports2
Input Connector2
Weight0.141 kilograms

Questions about this item

Does the Keen Eye KETTA-1001 run hot or draw much power when left on all day?

This passive switch has no power supply and generates no heat; it simply routes the amplifier signal through screw-down terminals.

What cables or connectors must I already own to use the KETTA-1001 with my amplifier and speakers?

You need speaker wire for the screw-down terminals; the box accepts bare wire or spade lugs and provides two sets of speaker outputs plus one amplifier input.

Will the 10 watts per channel limit of the KETTA-1001 work safely with my older amplifier and existing speakers?

The selector is rated for 10 watts continuous per channel; verify your amplifier's output and speaker impedance, especially when using the A+B combined mode.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.