Kaybles
Kaybles 50HDMI-8-MM-6 Ultra High Speed HDMI Cable 6ft 48Gbps 8K 60Hz 4K 120Hz
An Ultra High Speed HDMI cable carrying 48Gbps bandwidth for 8K at 60Hz and 4K at 120Hz with Dynamic HDR and eARC
- TypeHDMI Cables
- Cable Length6 ft.
- Connector Number2
- Connect From1 x HDMI 2.1 Male
- Connect To1 x HDMI 2.1 Male
- Terminal GenderMale to Male
- 48Gbps bandwidth enables 8K at 60Hz and 4K at 120Hz
- Dynamic HDR optimises brightness and colour per scene or frame
- eARC carries Dolby Atmos, Dolby TrueHD, DTS:X and DTS Master
- Auto Low-Latency Mode, Variable Refresh Rate, Quick Frame Transport and Quick Media Switching reduce lag and stutter
- 29AWG conductors with aluminium-mylar foil and braid shielding protect signal integrity over 6ft
6ft Ultra High Speed HDMI 2.1 Cable
This 6ft male-to-male cable carries 48Gbps bandwidth and meets the Ultra High Speed HDMI specification with Ethernet. It supports 8K resolution at 60Hz and 4K at 120Hz using VESA DSC 1.2a compression. Gold-plated connectors and aluminium-mylar foil with braid shielding protect signal integrity.
Suited to 8K displays and high-refresh gaming.
The 6ft length fits typical desk or living-room setups linking a console, GPU or media player to an 8K TV or 4K 120Hz monitor. Buyers needing longer distances or in-wall installation should look at active optical or fibre alternatives. The 29AWG conductors limit passive reach to this span.
Fits HDMI 2.1 ports and frees bandwidth for eARC
Plug directly into any HDMI 2.1 port on a graphics card, console, AV receiver or display; the cable is backwards compatible with earlier HDMI versions. The 48Gbps headroom carries Dynamic HDR metadata and eARC bitstreams such as Dolby Atmos or DTS:X without a separate audio return cable. PVC jacket routes easily behind furniture.
Highlights
- 48Gbps bandwidth enables 8K at 60Hz and 4K at 120Hz
- Dynamic HDR optimises brightness and colour per scene or frame
- eARC carries Dolby Atmos, Dolby TrueHD, DTS:X and DTS Master
- Auto Low-Latency Mode, Variable Refresh Rate, Quick Frame Transport and Quick Media Switching reduce lag and stutter
- 29AWG conductors with aluminium-mylar foil and braid shielding protect signal integrity over 6ft
Specifications
| Brand | Kaybles |
|---|---|
| Model | 50HDMI-8-MM-6 |
| Type | HDMI Cables |
| Cable Length | 6 ft. |
| Connector Number | 2 |
| Connect From | 1 x HDMI 2.1 Male |
| Connect To | 1 x HDMI 2.1 Male |
| Terminal Gender | Male to Male |
| Shielding | Aluminum-Mylar Foil with Braid |
| Specifications | Connector: Plating Gold Cable Jacket Type: PVC (Polyvinyl Chloride ) Cable Shield: Aluminum-Mylar Foil with Braid Cable Marking: Ultra High Speed HDMI Cable with Ethernet Wire Gauge: 29AWG Bandwidth: 48Gbps HDCP: HDCP compliant Dynamic HDR (High Dynamic Range): Yes eARC: Yes Audio: Up to 32 audio channels (Up to 1536kHz audio sample frequency) Auto Low-Latency Mode (ALLM): Yes Variable Refresh Rate (VRR)L: Yes Quick Frame Transport (QFT): Yes Quick Media Switching (QMS): Yes |
| Features | Ultra High Speed HDMI cable. Supports high resolutions, including 8K / 60Hz and 4K / 120Hz (* VESA DSC 1.2a link compression can be used to achieve resolutions above 8K60 / 4:2:0 / 10-bit color, such as 8K60 RGB, 8K120 and 10K120). Increased bandwidth up to 48Gbps. Dynamic HDR enables support for scene-by-scene or frame-by-frame basis when compared to HDR (HDR metadata is taken through the average of an entire movie). eARC supports the latest audio formats (DTS Master, DTS:X, Dolby TrueHD, Dolby Atmos, and more. Note: eARC is also supported in previous High Speed HDMI cables). Added |
| Shipping weight | 0.17 kg |
| Package size | 152 × 127 × 25 mm |
Questions about this item
What HDMI version must my TV and source device have to use the 48Gbps bandwidth of this cable?
Both devices need HDMI 2.1 ports to unlock the full 48Gbps bandwidth; the cable is backwards compatible with older HDMI versions but will run at their lower speeds.
Will this 29AWG cable work reliably with my older 4K 60Hz monitor and HDMI 2.0 graphics card?
Yes, the cable is backwards compatible with previous HDMI standards, so it will carry 4K 60Hz signals from your HDMI 2.0 source to the monitor without issues.
How can I verify the cable is delivering 8K 60Hz or 4K 120Hz with Dynamic HDR and eARC after connecting it?
Open the display’s on-screen information menu to confirm the active resolution and refresh rate, and check the source device’s audio output settings to ensure eARC formats such as Dolby Atmos or DTS:X are being passed through.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00113914BTC
In stock
